Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

djcolopi · 07-11-2018, 10:33 PM

We finally have the car up and running, installed the lakewood drag shocks, 3.90 gear swap and installed a LPW diff cover, put in the beefed up 6L50E with custom oil pan, and finished the fuel cell. Been a roller for too long.

However, after long hours this past week, we found out the FX1 Pro Racing seats do not fit, the door bar latch will not close all the way. We are going to try to fabricate something to raise the bracket a tad to see if we get clearance. If this works, we will transport the car up to camaro fest tomorrow. Overall time was not managed well and we had unexpected hurdles preventing us from getting as much done by this time period.

07-11-2018, 10:33 PM	#373
djcolopi Drives: @orange_maro Join Date: May 2014 Location: MD Posts: 1,036 View My Garage	We finally have the car up and running, installed the lakewood drag shocks, 3.90 gear swap and installed a LPW diff cover, put in the beefed up 6L50E with custom oil pan, and finished the fuel cell. Been a roller for too long. However, after long hours this past week, we found out the FX1 Pro Racing seats do not fit, the door bar latch will not close all the way. We are going to try to fabricate something to raise the bracket a tad to see if we get clearance. If this works, we will transport the car up to camaro fest tomorrow. Overall time was not managed well and we had unexpected hurdles preventing us from getting as much done by this time period. Attached Images __________________ Instagram @orange_maro_ Last edited by djcolopi; 08-18-2018 at 10:13 AM.