|
Well...After another day of troubleshooting I'm about to give up hope on this one. I double checked all grounds (good) I checked resistance on the injectors (tested good 12.5 ohms), I tested keyed on voltage at the injector (12V all good), I checked the driver circuit from the ECM with a test light (flashes indicate its sending a good signal), I put in a diode across an injector (flashed indicates its sending a good signal). SO if injector is good, ECM is good, and wiring is good. What the heck is going on here? Anything else I can try here?
__________________
Loving every minute!
2SS/RS L99 - Delivered 8/8/09
1/4: 13.330 @ 105.52 MPH - bone stock
|