Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

UKCamaro · 05-23-2017, 11:09 PM

I am looking to buy a set of staggered 20x10 front / 20x11 rear MRR M228 graphite rims. I see the 20x10 (front) comes with two choices of offset - 23mm or 35mm. I am concerned the 23mm offset will look too aggressive with too much tire protruding past the fender. The 35mm offset is probably a good alignment with the fender but will reduce the clearance on the inside where I am concerned about clearance of the tire with the strut.
I am considering front tire size 275/40/20 and rear 315/35/20.
These will be going on a 2012 2SS/RS (with Brembo brakes.)
Does anybody have any experience with these rims and 23mm v 35mm offsets? Any clearance issues? Which offset is the popular choice?

05-23-2017, 11:09 PM	#1
UKCamaro Drives: 2012 Camaro 2SS/RS Join Date: Jun 2016 Location: Spring, TX Posts: 12	MRR M228 Front Wheel Offset Question I am looking to buy a set of staggered 20x10 front / 20x11 rear MRR M228 graphite rims. I see the 20x10 (front) comes with two choices of offset - 23mm or 35mm. I am concerned the 23mm offset will look too aggressive with too much tire protruding past the fender. The 35mm offset is probably a good alignment with the fender but will reduce the clearance on the inside where I am concerned about clearance of the tire with the strut. I am considering front tire size 275/40/20 and rear 315/35/20. These will be going on a 2012 2SS/RS (with Brembo brakes.) Does anybody have any experience with these rims and 23mm v 35mm offsets? Any clearance issues? Which offset is the popular choice?