|
I have all bmr on my car. Cradle, trailing arms, toe rods, upper rear control arm poly bushings, all other bushings are poly as you listed. I am lowered on Ridetechs 1” and don’t need adjustable arms. I don’t drag race but I have no wheel hop in off the line starts in autocross or on street. More of traction limited now and how much I can rev on launch without spinning or laying rubber down before hooking up.
And the ride wasn’t hurt at all or very little, a little more solid over bumps. You will get some of that feel if you go to stiff on the rear swaybar
|