OK, I was wondering how to spray a bunch of cleaner into/around the TB without it going down the throat of the intake. I
CAN do throttle body removal, it's removing the intake manifold & walnut blasting the valves that scares me. Any specific cleaner for the TB, it seems the only cleaner readily available for the MAF sensor is CRC.
Quote:
Originally Posted by ChibiBlackSheep
You need to remove it to clean it. Super easy, it's just 4 10mm bolts and a quick disconnect of the sensor.
Without a catch can, you probably have a lot of carbon buildup that will need to be cleaned. Worth pricing around if you aren't comfortable doing it yourself.
For the plugs, check out this link: http://www.paulstravelpictures.com/G...ide/index.html
If they are bad, just replace with factory equivalent. |