03-27-2016, 08:58 PM
|
#12
|
Montani Semper Liberi
Drives: 2011 Black 2SS/RS w/ IOM stripes
Join Date: Feb 2010
Location: Masontown, WV
Posts: 4,841
|
Quote:
Originally Posted by DonM
Not all black paint is as hard to work with as some say. The paint on my Camaro (2013) is very hard (relatively speaking) and doesn't haze or swirl easily. When I got the car there were swirls all over it, but not as bad as they should have been seeing how the car had been Dealer detailed and the previous owner was good with mechanical maint, but not APPEARANCE maint.
I used a Meguiars thin cutting pad and Ultimate compound and ended up with THIS:
I did this on a cold windy day where I didn't want to be outside, so I only took a few hours to compound the paint. The UC finished out so good on my paint, I didn't need to use a polish afterwards, I just had to wax.
|
+1 my black paint is pretty hard and while the hazing isn't as noticeable but I try to fine polish it a little more to bring the gloss up.
__________________
Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint
|
|
|