First off - want to thank everyone on Camaro5 - I am a die hard do it your selfer and this forum has been like crack for me
.
Anyway ordered two RX catch cans from Tracy, one for my Camaro and one for my wife's Tahoe. I mounted the one for the camaro off the engine cover bracket using the smaller bracket that Tracy sent me. On the Tahoe I used the longer bracket off the Master Brake Cylinder as recommeded (first pic). My wife complained that the Tahoe was making a loud noise. After some investigation found that the long bracket was causing the Catch Can to resonate at certain RPMs quite loudly. Simple solution was to shorten the bracket. I also decided to mount off the engine just below the altenator since there was two threaded holes available (second pic). Zero noise now