Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

BullF-16 · 03-20-2012, 08:46 PM

Brand of what, internals, or twin turbos....im assuming internals. I wouldnt necessarily bore it out but hone out the cylinders a bit to 4.07" and add a 4.00" stroker crank. Shoot for about 416 - 418 cubes. Callies Compstar crank and callies h-beam/I beam rods and Wiseco or Diamond forged pistons. Think about coating the pistons with ceramic tops for a little extra strength. This will be a start

What boost are you looking at and what is your final HP goal?

ARP hardware and ACL coated bearing etc. etc. etc

03-20-2012, 08:46 PM	#2
BullF-16 USAF retired! Thank God! Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011 Location: North Texas Posts: 2,799	Brand of what, internals, or twin turbos....im assuming internals. I wouldnt necessarily bore it out but hone out the cylinders a bit to 4.07" and add a 4.00" stroker crank. Shoot for about 416 - 418 cubes. Callies Compstar crank and callies h-beam/I beam rods and Wiseco or Diamond forged pistons. Think about coating the pistons with ceramic tops for a little extra strength. This will be a start What boost are you looking at and what is your final HP goal? ARP hardware and ACL coated bearing etc. etc. etc __________________ HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: 1281/1133 SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates all setup by JusticePete! :Gforce 9" 35spline S-Trac, 1500hp Outlaw axles, 3.5"alum DS, Monster Triple disc; 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads