|
Well I now the clutch is bled, I have pushed almost another full quart of brake fluid through this thing. Nothing but fluid is coming out. I press the pedal and it just stays on the floor or just barely returns just alittle. I did remove the return spring since that is what Matt at Tick said to do also. No amount of adjusting the rod makes any difference. I started with the rod all the way screwed in, as the instructions say and nothing changes. I adjust the rod so that the pedal is about even with the brake pedal and nothing. I have adjusted the rod all the way out to where the pedal is at the stock height and nothing.
Its bleeds and pushes fluid but there is NO pressure that pushes the slave and engage the clutch. it just basically pumps, does not provide pressure. Patience will I have had a lot and totally understand what I am doing. I understand this thing is not working. Out again and back in with the stock. FML
|