Quote:
Originally Posted by cdb95z28
It partly depends on your wheel offset. And you state you are maxed out on camber, what is your camber #? What tire are you currently running?
I just did 325/30-19 Goodyear 3R square on my '14 1LE with the Z's DSSV struts. I run 20mm offset front wheels and used a 5mm spacer, effectively making it a 15mm offset.
But I also have Vorshlag camber plates at full in. As long as you have about .250" clearance between the tire and the strut you will be good. You may need a small spacer.
Take a look at your current clearance and make the call from that. If you are already near .250" clearance then you'll have to run a spacer.
|
I also have vorshlag camber plates I am at -3.3 front 1.9 rear. I am also a 14 1le with stock z28 suspension and wheels. Did you have any rub when you are turning lock to lock?
Sent from my SM-G892A using Tapatalk