Update:
I did pull my lights to check the seals and make another mod.
Seals were fine with the silicone.
I re-adjusted my outer two taillight half moons. I felt that they were tucked to far inward. So, pulled the light, the screw and slid the half moon out another half inch and re-sealed. No issues. 20 minute fix per.
The original location was based on looking at the lens straight on, it worked. But, to cars in the rear the outer tail light lens are actually canted outward and this tucks the half moons to close to the inside. By moving the half moon outward, it centered the half moon as it is viewed from the rear.
|