View Single Post
Old 12-07-2016, 04:26 PM   #1
Ricardo@Phastek

 
Ricardo@Phastek's Avatar
 
Drives: the boss nuts....
Join Date: Aug 2012
Location: Houston, TX
Posts: 1,428
Send a message via AIM to Ricardo@Phastek Send a message via Yahoo to Ricardo@Phastek
Talking First lowered ZL1......

As the tile says, not sure if it has already been done but we did it again!!

We were the first to lower a 6th Gen and now we are back at it again lowering a ZL1!! Have a look at the results!!

We measured and triple checked everything before we did a full install. I have got plenty more pictures that we are loading that will show how much of a drop we got. I will post up some pictures when they are all done.

A little background on the car. The car has 920 miles on it, owner wanted to close the gap a bit on the front wheels but did not want to slam the car to the ground. Still wanted to be able to get in and out of the driveway with out any issues.

STOCK measurements (From ground to Top of fender):
Front Driver - 28 7/8"
Rear Driver - 28 3/4"

Front Passenger - 28 15/16"
Rear Passenger - 28 3/4"

After measurements (From ground to Top of fender):
Front Driver - 27 1/2"
Rear Driver - 28 3/8"

Front Passenger - 27 9/16"
Rear Passenger - 28 1/4"










Ricardo@Phastek is offline   Reply With Quote