View Single Post
Old 01-26-2012, 10:48 PM   #9
Tribute

 
Tribute's Avatar
 
Drives: 2012 SLP ZL770 #17 (Hugger Orange)
Join Date: Aug 2011
Location: Northern Virginia
Posts: 1,667
Looks good. About the front black out I ran into some trickiness too when installing it. You can either remove the bumper and install it and fold over the edge some, or if you don't want to remove the bumper you can push it back enough so no paint it showing and let it adhere and cure for a few days and depending on how far it's back you can leave it there and the excess will be fine or carefully strip it off with an exacto or other razor blade. The toughest part for me was the curves on the side and trying to get those right and not have to have the whole stripe so far forward.

I focused on covering on the paint and working the sides slowly letting it dry and adhere for about 20 minutes then worked at it again and it came out like a charm. I have a close up in my album.


Hope this made sense. It's late. ;-)
__________________
My Build Journal
Tribute is offline   Reply With Quote