Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

mrr23 · 04-21-2018, 07:49 PM

finished up today. overall about 6 hours.

picture of the valve stem seals and spring seats installed

springs on

rockers and pushrods on. make sure to add some thick lube to the ends of the pushrods to prevent any galling on startup.

the rocker kit comes with thicker valve cover gaskets and spacer nuts to add to the valve cover bolts

valve covers on

coil packs back on

crank it up and make sure all is well. no valve cover leaks and major noises not there. if all is well, install cover and strut tower brace and be done.

04-21-2018, 07:49 PM	#4
mrr23 Drives: 2014 SS Join Date: Feb 2018 Location: orlando Posts: 59	finished up today. overall about 6 hours. picture of the valve stem seals and spring seats installed springs on rockers and pushrods on. make sure to add some thick lube to the ends of the pushrods to prevent any galling on startup. the rocker kit comes with thicker valve cover gaskets and spacer nuts to add to the valve cover bolts valve covers on coil packs back on crank it up and make sure all is well. no valve cover leaks and major noises not there. if all is well, install cover and strut tower brace and be done.