View Single Post
Old 12-28-2013, 07:50 PM   #5

Drives: not stock
Join Date: May 2011
Location: Oversneeze
Posts: 4,516
Originally Posted by tanur420 View Post
would that also be adequate clearance to install the trailing arms/toe rod? i cant remember which, but i read one of them needs cradle dropped to install because a bolt wont clear
Lowered not dropped, the process is the same. Remove 2 bolts and loosen the other side, do your work, switch sides and repeat.

You need to undo a fuel pump harness connector and pop the parking brake cables out as well. I had to undo the lower shock bolt as well since the shocks were preventing it from dropping as much as I needed it to. I believe that was all.
Synner is offline   Reply With Quote