UPDATE: FOUND A SOLUTION
So my side panels have continued to pop out. I took some time to finally find out why and thought I should share the solution.
Trimming the leather properly will allow these to sit like they were stock so recheck the way you trimmed it if you're having problems. I thought I trimmed it adequately until I took some time to really see how everything fits together. I used an exacto knife.
Places to make sure you trim:
-ensure there is very little leather where the hooks at the top edge of the side panels engage
-towards the middle of each side panel, there is an alignment pin and right below is a plastic clip, make sure you clear out all the leather from this alignment pin area so the side panel can sit as flat as possible onto the center console, this really helps with making it not pop out, as thin as the leather is, it really does make the panel pop out when you leave it here
|