Quote:
Originally Posted by Camaroking98
Think this would be necessary for the ZL1 with 325 30 R20?
|
From what I read, gm changed the routing of this body harness at some point, not sure if it was 2019 or 2020, though, meaning you may get away with not touching the harness. I'd check no matter what.
This tire is 0.8" wider than stock, so you may need a small spacer and/or massage the wheel well liner with a heat gun, because there isn't a lot of clearance to begin with, harness or not.
Also, the 11" wide stock rear wheel is fairly narrow for a 325 width tire, the ZL1 1LE has 12" wheels in the back.