View Single Post
Old 09-29-2011, 08:51 PM   #3
AintQik
 
Drives: 67 Pro-Tourer, 12 SS
Join Date: Aug 2011
Location: NJ
Posts: 249
Yeah, I did expand it to a 2.5" but with the blower you will really want a 3". If it does sound as good as I think it will, I'll cut the 2.5" axle back off and use 3" stainless and the same resonators. The ends are tapered down so it would be easy-peesy to just cut them back to the diameter you needed and weld them onto a 3" header-back.
AintQik is offline   Reply With Quote