Quote:
Originally Posted by lawdog
Sounds like you overfilled it, I assume you have a v-8 and if so the filler tube actually comes off of the resavour very easily and it probably poured out at the connection. It snaps in and out ! goofy setup.
|
+1
I would drain it, fill it with water, warm it up, drain it again, repeat. Then drain it and put a gallon and a half of fresh green stuff in. Dexcool does not transfer heat as well. Make sure you have the heater on when warming it. Then top it off with water.
home flush kits have you cut the heater hose, which I wouldn't do
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes.