[cdb95z28]

I ordered my Camaro with the priority of performance first
1SS: Lighter weight, no frills
1LE: 'Nuff said
NPP: GM has an exhaust that is worthy of not having to be replaced by aftermarket? Hell Yeah.
Recaros: Worth every penny. I modded the driver's seat in my '95 Z28 for more side bolstering. It helped, but even with a CG Lockhttp://www.cg-lock.com/autocross.html, I was not restrained. The Recaros work so well on the track that it was hours into my first event that I realized I wasn't holding myself in the seat like I was in the '95.
And having a bulged L4-5 disc, the proper seating position is critical to be pain free. The Recaros are also great there, no issues, even on a long trip. Perfection.

Since we have four other vehicles, the Camaro only comes out in nice conditions. But when it is nice, I drive it every chance I get. Since the purchase on June 2nd 2014 to November 11th I put 4000 miles on it. I guess you could say it is my daily driver weather permitting. I also had plans to take it to the track for road racing, not drag racing.

I am particular with mods (as most of us are) but I like to do them in a manner that is a bit under the radar. I like the thought of mods looking like they came from the factory, adds a certain symmetry to the entire package. But that will not limit me on options. And I do not want to crossover to mods that start to take too much driveability away. It sees more street time than track time. I guess that is coming with older age.


Mod List
Completed Mods in GREEN

Suspension
-Z/28 Multimatic DSSV Dampers, Detroit Speed Engineering Speed Kit 1 Springs and rear Anti-roll Bars
-OE 1LE Front Anti Roll Bar
-Moreno Camber Plates
-UMI Performance Roto-Joint Trailing Arms
-Detroit Speed Engineering Rear Toe Rods
-Z/28 Rear Knuckles, Part#s 23262765/23262766
-Z/28 Rear Upper Control Arm Bushings, Part #s 23104907 and 23104906
-Z/28 Front Lower Control Arms, Part#s 23105014/23105015
-JPSS Delrin Radius Rod Inserts
-Z/28 Front Wheel Bearings, ##25954415
-Homemade Front Caster Locks
-Dorman Long Wheel Studs, Part # 610-490, M14-1.5 Serrated, 15.7mm Knurl, 69.75mm Length
-Aggressive Race/Street Alignment
-Forgeline GA1R Open Lug/Deep/No Cap Wheels in Gloss Black, 19x11 at Front, 19x11.5 at Rear-Race
-Goodyear F1 SuperCar 3R 305/30-19 Tires on all four wheels-Race
-OEM 1LE Wheels with OEM Goodyear F1 SuperCar G:2 for Street, 12mm front spacer/12mm rear spacer for better stance
-AFE/Pfadt Rear Solid Subframe Mounts
-Baer Tracker Bump Steer Kit, Part# 3301018, Drilled and Tapped to 16mm x 1.5mm threads for 2014/15 Electric Power Steering Tie Rod Ends

Powertrain
-Chevrolet Performance Z/28 Cold Air Intake
-AFE/Pfadt Tri-Y Headers with Cats/Jet Hot Ultra Extreme 2500 Coating
-Homemade Skip Shift Eliminator
-RDP Motorsports Tune, 442 RWHP
-Braille B2317R Battery and matching Braille Mount #2318
-Rebuit OE TR6060 by Bowler Transmissions. Viper Vespel Shift Pads, Non-Advanced 3rd & 4th Gear, Carbon Syncros 1-4 Gear, ZR1 Pick Up Tube
-Tilton ST-246 Clutch Kit, Organic Twin Disc, Machined Aluminum Pressure Plate, Slave Assembly, Lightweight Steel Flywheel, Part# 55-1005
-Apex Catch Can
-MGW Short Throw Shifter
-Wilwood 7oz. Remote Clutch Reservoir w/ Homemade Bracket
-Tick Clutch Bleeder
-Forza 3-Way Exhaust Controller
-Auto-Blip Rev Match Controller
-Brembo DOT 4 Brake Fluid used at Clutch
-Eaton TrueTrac Differential
-Chevrolet Performance Z/28 Rear Differential Cooler
-NGK ITR6G9 Laser Iridium Plug, #90156

Interior
-Raptor Blue Shift Light
-SRP Aluminum Pedals
-Autometer 2 1/16" Cobalt Digital Oil Temp Gauge #6948/Mounted in Driver Side HVAC Vent/Ebay Gauge Adapter

Exterior
-Window Tint
-Paint Protection
-Chevrolet Performance Heritage Grille
-Z/28 Flowtie
-GrafXWorks Rear Bowtie Overlay
-ZL1 Addons Splitter Guards
-ZL1 Front Fender Air Deflectors with Aero Sport Concepts extensions
-ZL1 Rear Splash Guards
-RPI Designs Front Splash Guards
-ZL1 Belly Pan
-Aero Sport Concepts (L)Wicker Bill @ Rear Spoiler
-Diode Dynamics and Sylvania ZEVO LED Lighting

Brakes
-C7 Corvette ZO6 Non-Carbon Ceramic Front Calipers w/ Vented Pistons, repainted red with G2 Epoxy Caliper Paint. Custom 1LE and Brembo decals
-ZL1 Two Piece Front Rotors
-Goodridge Front & Rear ZL1 Brake Hose Kit
-Chevrolet Performance Z/28 Front Brake Ducts and Quantum Rotor Duct Kit with custom intake at existing fog light trim bezels
-DOT 4 Brembo HTC-64T Brake Fluid
-Raybestos ST43 Racing Brake Pads
-Girodisc Titanium Front Caliper Shims

Cooling
-Straight Water +Driven CSP
-Export Front Bumper Reinforcement
-Chevrolet Performance Z/28 Rear Diff Cooler
-Hood Baffle Removal
-Improved Racing 3 Pass Oil Cooler, #MHX-245, Improved Racing 205* Thermostat, # FSM, Mishimoto M22 Oil Filter Sandwich Adapter, #MMOP-SPM22, Custom mounting brackets, ducting/Removed OE Oil Cooler


Lubrication
-Torco RGO 85W-140 Gear Lube
-Driven STF Syncromesh Transmission Fluid
-Mobil 1 Turbo Diesel 5W40/WIX WL10290XP Oil Filter
-Gold Plug @ Engine, Trans and Rear

Safety
-Simpson Race Products Hybrid S Head and Neck Restraint
-Schroth Flexi 2x2 6-Point Harness
-Modified OE Recaro Driver's Seat for use with the Schroth Harness Anti-Sub Belts
-Brey-Krause Harness Bar