Splash guards - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

cactuseater · 09-22-2011, 03:34 AM

Grab some 3M Rubberized Undercoating in a spray can, tape them off, scuff the surface with sandpaper, and spray the inside area of the guards. Done it many times to other vehicles, just got mine in from eBay (Freedom Chevrolet) and they are factory painted to match the RJT Camaro LT my wife has. On my SS, they look really weird on the back since the stock tire size is rather fat in comparison - they actually look crooked, not straight. So my SS will go without....

Patrol.in.a.Camaro · 09-22-2011, 04:05 AM

Just got my IOM splash guards today in the mail. Will install them tomorrow!!

OPP · 09-22-2011, 07:19 AM

Quote:

Originally Posted by theagent

can someone help? Just put yellow guards on...and the yellow color is also on the inside of the guard- in the wheel well area...and of course the yellow gets dirty fast from the road dirt- question is- are all the color coded guards also painted the same color on the inside- at the wheel well? Thanks for any help or pics

PLASTIDIP

clav1n · 09-22-2011, 09:59 AM

I got mine from gmpartsdirect after about a week and a half, roughly 6 to 7 business days. They were painted black to match my car.

My dealer charged $80 to install, which I opted for since I wanted the holes drilled for extra stability but I don't feel confident drilling into my car. I would have to say that the screws may help, since the 3M tape is rather weak.

kiteman · 09-22-2011, 10:18 AM

i don't really like them, they definitely don't look like they fit. what is their use exactly?

09-22-2011, 04:05 AM	#44
Patrol.in.a.Camaro Lockin it Down! Drives: 2012 V6 2LT/RS IOM Camaro Join Date: Jul 2011 Location: Arizona Posts: 299	Just got my IOM splash guards today in the mail. Will install them tomorrow!! __________________ 2012 2LT/RS coupe. Inferno Orange Metallic w/ Black Strip. 6 Speed Manual. IOM Leather Interior. Sunroof. 15% Window tint ~ Black Billet Door Sills ~ Orange Billet Racing Pedals ~ IOM Molded Splash Guards ~ ~That whenever any Form of Government becomes destructive of these ends, it is the Right of the People to alter or to abolish it, and to institute new Government, laying its foundation on such principles and organizing its powers in such form, as to them shall seem most likely to effect their Safety and Happiness~

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Molded Splash Guards	Jimmy	Cosmetics and Lighting Modification Discussions	164	06-09-2013 06:16 PM
Installed my CGM splash guards & RS badges	Suskam	Cosmetics and Lighting Modification Discussions	28	06-26-2011 04:25 PM
CGM w/ LS7 Front/Rear Blackout and Splash Guards	LittleRockCGM	Camaro Photos \| Spyshots \| Video \| Media Gallery	25	02-21-2010 10:00 PM
splash guards (not GM)	philthy	Cosmetics and Lighting Modification Discussions	0	07-24-2009 03:27 PM

09-22-2011, 03:34 AM	#43
cactuseater Drives: . Join Date: Nov 2010 Location: USA Posts: 856	Grab some 3M Rubberized Undercoating in a spray can, tape them off, scuff the surface with sandpaper, and spray the inside area of the guards. Done it many times to other vehicles, just got mine in from eBay (Freedom Chevrolet) and they are factory painted to match the RJT Camaro LT my wife has. On my SS, they look really weird on the back since the stock tire size is rather fat in comparison - they actually look crooked, not straight. So my SS will go without....

09-22-2011, 09:59 AM	#46
clav1n Drives: 2011 Camaro 2LT RS M6 Join Date: May 2011 Location: Chicago Posts: 59	I got mine from gmpartsdirect after about a week and a half, roughly 6 to 7 business days. They were painted black to match my car. My dealer charged $80 to install, which I opted for since I wanted the holes drilled for extra stability but I don't feel confident drilling into my car. I would have to say that the screws may help, since the 3M tape is rather weak.

09-22-2011, 10:18 AM	#47
kiteman Drives: 2012 45th Camaro, 2SS/M6 Join Date: Mar 2011 Location: At my computer Posts: 1,327	i don't really like them, they definitely don't look like they fit. what is their use exactly?