03-27-2024, 01:47 PM | #15 |
Drives: 2010 2SS/RS A6 Join Date: May 2019
Location: Hki.Finland
Posts: 1,073
|
My grandfather used a duster, which was made from ostrich feathers.
Btw.Ostrich feathers have also been used in the automotive industry. |
05-19-2024, 08:38 AM | #16 |
Drives: 2013 zl1 Join Date: Apr 2023
Location: Wi
Posts: 74
|
Just following up…I took the advice of many here…
- ceramic coating really helps…garage cover just skids off lol - don’t touch the car unless it is clean and or wet and or soapy first - dry car first with strong leaf blower - ceramic spray shine is all I use after drying. No wax - use linear polish strokes..never circle motion Process - spray soap foam on car - let sit 2-3 min - rinse - spray foam soap again - two bucket method wash car (one bucket clean water..one soap water) - always rinse wash mit before continuing with soap bucket - rinse again completely - dry (air) - favorite ceramic spray shine/protectant Leave it alone…lol |
05-19-2024, 10:09 AM | #17 |
|
Only thing I would add to the above method is rinsing with a good DI water. This makes for a spot free rinse. The DI filter removes all the solids from the water. I needed this because my water is so hard from being a well.
__________________
|
05-19-2024, 01:53 PM | #18 |
The BBOMG fill-in husband
Drives: 2015 2SS/RS 1LE AKA V1LE Join Date: Aug 2010
Location: Elmira, NY
Posts: 4,465
|
California duster for sure!
__________________
UPSTATE C5 MEMBER
|
05-22-2024, 07:04 PM | #19 |
Drives: 2013 zl1 Join Date: Apr 2023
Location: Wi
Posts: 74
|
|
|
|
|
|