You are browsing camaro5 
 |
|
03-08-2015, 04:47 PM
|
#1 |
 
Drives: 2012 camaro 1LS. M6 Join Date: Sep 2012
Location: Lithopolis OHIO
Posts: 512
|
plastic dip
Would plastic dip work on the front splitter if so how long will hold up any help would be appreciated
__________________
Mods..mrt v2. Cai intake v max throttle body. 20% windo tint & RX catch can Gianna 20in rims nitto 555 & afterburner tail lights RS halo head lights & gm heat extractor 4 pack gauges & panted heritage Grille & zl1rear sproler t5 splitter custom head rest
|
|
|
|
03-08-2015, 09:42 PM
|
#2 |
|
Vrrrm.
Drives: 2011 2SS/RS LS3 Join Date: Jun 2013
Location: MA
Posts: 1,495
|
I tried it. It held up very well but with the abuse a splitter takes. I would go with paint and then some sort of clear bra material over it. My plasti dip began to discolor and eventually it will peel.
That's really the best way to do it.
__________________
 |
|
|
|
|
03-08-2015, 11:08 PM
|
#3 |
|
Texas
|
If you are going to do it I would add plenty of coats like 15 and then add about 6 coats of Glossifier. Anything goes wrong you can always go back and touch it up. the glossifier seems to help with fading. I have it on my car in many areas and is doing just fine after three months. Just did the outside of my mirrors this weekend and turned out nice
__________________
|
|
|
|
|
03-09-2015, 12:53 AM
|
#4 | |
|
Account Suspended
Drives: 2011 Camaro VR 2SS/RS & Impala Join Date: Apr 2013
Location: Riverside,ca
Posts: 5,342
|
Quote:
|
|
|
|
|
|
03-09-2015, 07:41 AM
|
#5 |
|
Drives: 2012 camaro 1LS. M6 Join Date: Sep 2012
Location: Lithopolis OHIO
Posts: 512
|
Thank you I will just have it repainted
__________________
Mods..mrt v2. Cai intake v max throttle body. 20% windo tint & RX catch can Gianna 20in rims nitto 555 & afterburner tail lights RS halo head lights & gm heat extractor 4 pack gauges & panted heritage Grille & zl1rear sproler t5 splitter custom head rest
|
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
