New here, few questions - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bonkotsu · 10-01-2013, 10:05 PM

Hey guys, I have used a different forum in the past but with my new car I figured I would ask people with similar interests. My old car was a 1994 Mustang GT, had it for quite some time, got into a bad wreck, the woman who caused the wrecks insurance company gave me a good bit out of my mustang which led to the down payment on my 2011 Camaro.

Back story set aside I am looking for a new front bumper, some ---hole hit the side and got my front right part of my bumper and fender dinged up a bit while I was parked for work and didn't leave any information.... I had done some research before but now I can't seem to find it but I am looking for the SS Camaro from bumper that fits on the v6. Before you ask no I am not putting SS badges on it and trying to make it look like an SS without it being one, I just really like the front is all. I found somebody before who sold them on ebay but I cant seem to find it anymore. Anybody know what I am talking about?

Secondly I have been rather disappointed with the sound. I swapped out my old exhaust on my mustang for Flowmasters and it was amazing. With my new car I'm just not wanting to replace too much since its only 2 years old but down the line I will be more willing. Basically I want a much better sound just wondering if I will need to alter much with my new setup.

Any input is appreciated. Below I attached pictures if anybody is curious

snaphappy · 10-01-2013, 10:12 PM

Sound is so subjective. I'm happy with an axle back on my LS3. There's tons of videos on here so you can listen to the sound of each system, see what you like! But the mufflers on this thing are enormous, so just about anything you do will really improve the sound!

Angrybird 12 · 10-01-2013, 10:20 PM

Welcome to the forum!
Just search eBay and put "Camaro SS front bumper" in the search. I did and got several selling them. Remember you will also need the lower grille.
I have The MRT V2 Axel Back exhaust, I love the sound once it seasoned in. I have also heard the Dynomax VT is a good choice for the V6.
I hope this helps here is a short clip of mine

31B · 10-01-2013, 10:37 PM

As far as the front end, the SS fascia costs the same as the V6. I did it to mine before I switched cars.

For exhaust I have heard good things about MRT V2.

RubyCamaro · 10-01-2013, 10:47 PM

Congrats on the new permagrin maker & welcome aboard. Here is a link to a coupls of professionally done videos of V6 exhausts. The first one is mine. It is a Borla. It sounds great at start-up, on accelleration & at wot but is quiet at cruise & idle. The other one is somewhat more aggressive. Listen with headphones to get the best idea. Good luck deciding.

http://www.camaro5.com/forums/showthread.php?t=148671

bonkotsu · 10-01-2013, 11:10 PM

Quote:

Originally Posted by 31B

As far as the front end, the SS fascia costs the same as the V6. I did it to mine before I switched cars.

For exhaust I have heard good things about MRT V2.

What website did you get it from?

bonkotsu · 10-01-2013, 11:15 PM

Quote:

Originally Posted by Angrybird 12

Welcome to the forum!
Just search eBay and put "Camaro SS front bumper" in the search. I did and got several selling them. Remember you will also need the lower grille.
I have The MRT V2 Axel Back exhaust, I love the sound once it seasoned in. I have also heard the Dynomax VT is a good choice for the V6.
I hope this helps here is a short clip of mine

Love it, just love it

KaBoom1701 · 10-01-2013, 11:24 PM

See my mods listed below (color coded).

MR2 w/ Magnaflow X pipe is the way to go.

A CAI will help wake up the motor and sound as well.

bonkotsu · 10-01-2013, 11:29 PM

Think im sold on the MRT v2, I heard with axel back there is more cutting involved but it is cheaper, will it affect anything if i get the axel back then later down the road get x pipes or should i try to get it all at once?

31B · 10-01-2013, 11:35 PM

Quote:

Originally Posted by bonkotsu

What website did you get it from?

My LS was in an accident. Front Fascia had to be replaced. I just had them add the SS fascia instead of the 2LS fascia when it was in the shop.

Angrybird 12 · 10-01-2013, 11:37 PM

Quote:

Originally Posted by bonkotsu

Think im sold on the MRT v2, I heard with axel back there is more cutting involved but it is cheaper, will it affect anything if i get the axel back then later down the road get x pipes or should i try to get it all at once?

It's up to you, I don't think you really have to get them at the same time. I didn't get one but mine is a convertible and it won't fit without modifying the convertibles underbody bracing. Since you have a coupe that is not an issue.

X-Factor · 10-01-2013, 11:42 PM

Quote:

Originally Posted by KaBoom1701

See my mods listed below (color coded).

MR2 w/ Magnaflow X pipe is the way to go.

A CAI will help wake up the motor and sound as well.

I agree with KaBoom! I have the above set up with the resonators deleted along with 4" tips, and added with the Vararam CAI... let me tell you it sure woke my girl up, and she sounds amazing! Congrats on your new ride!

Sent from my Phablet!

KJS · 10-02-2013, 01:07 AM

Nice Ride! Enjoy your six shooter!

Sir Nuke · 10-02-2013, 06:45 AM

CONGRATS on your ride and Welcome to our happy little corner of the net, and to Camaro5. There is a BIG fridge on the back porch with anything you can think of in it...help yourself...of course only take what you can LEGALLY have. Make yourself at home on one of the big fluffy couches, kick your shoes off, put your feet up on one of the tables, yes we are allowed to do that, mom's, dad's, wives', husband's, girlfriend's and boyfriend's here don't care....and take it easy.

oh...btw....every once in a while a food fight breaks out...so you may not want to wear nice clothes here.

Welcome!!

10-01-2013, 10:05 PM	#1
bonkotsu Drives: 2011 Camaro LS Join Date: Oct 2013 Location: Salem, VA Posts: 5	New here, few questions Hey guys, I have used a different forum in the past but with my new car I figured I would ask people with similar interests. My old car was a 1994 Mustang GT, had it for quite some time, got into a bad wreck, the woman who caused the wrecks insurance company gave me a good bit out of my mustang which led to the down payment on my 2011 Camaro. Back story set aside I am looking for a new front bumper, some ---hole hit the side and got my front right part of my bumper and fender dinged up a bit while I was parked for work and didn't leave any information.... I had done some research before but now I can't seem to find it but I am looking for the SS Camaro from bumper that fits on the v6. Before you ask no I am not putting SS badges on it and trying to make it look like an SS without it being one, I just really like the front is all. I found somebody before who sold them on ebay but I cant seem to find it anymore. Anybody know what I am talking about? Secondly I have been rather disappointed with the sound. I swapped out my old exhaust on my mustang for Flowmasters and it was amazing. With my new car I'm just not wanting to replace too much since its only 2 years old but down the line I will be more willing. Basically I want a much better sound just wondering if I will need to alter much with my new setup. Any input is appreciated. Below I attached pictures if anybody is curious Attached Images

10-01-2013, 10:20 PM	#3
Angrybird 12 7 year Cancer Survivor! Drives: 17 Cruze RS, 07 G6 GT, 99 Astro Join Date: Dec 2007 Location: East Tennessee Posts: 21,546	Welcome to the forum! Just search eBay and put "Camaro SS front bumper" in the search. I did and got several selling them. Remember you will also need the lower grille. I have The MRT V2 Axel Back exhaust, I love the sound once it seasoned in. I have also heard the Dynomax VT is a good choice for the V6. I hope this helps here is a short clip of mine __________________ Cancer's a bitch! Enjoy life while you can! LIVE, LOVE, DRIVE... The Bird is the word!

10-01-2013, 10:37 PM	#4
31B Drives: 2014 Black 1SS A6 Join Date: Jun 2013 Location: Cameron, NC Posts: 658	As far as the front end, the SS fascia costs the same as the V6. I did it to mine before I switched cars. For exhaust I have heard good things about MRT V2. Attached Images

10-01-2013, 10:47 PM	#5
RubyCamaro Jan Drives: 2010 Camaro 1LT Red Jewel tintcoat Join Date: May 2010 Location: Springfield, TN Posts: 16,240 View My Garage	Congrats on the new permagrin maker & welcome aboard. Here is a link to a coupls of professionally done videos of V6 exhausts. The first one is mine. It is a Borla. It sounds great at start-up, on accelleration & at wot but is quiet at cruise & idle. The other one is somewhat more aggressive. Listen with headphones to get the best idea. Good luck deciding. http://www.camaro5.com/forums/showthread.php?t=148671 __________________

10-01-2013, 11:24 PM	#8
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,631	See my mods listed below (color coded). MR2 w/ Magnaflow X pipe is the way to go. A CAI will help wake up the motor and sound as well. __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

10-01-2013, 10:12 PM	#2
snaphappy Drives: 2011 Camaro Convertible SS2/RS LS3 Join Date: Jun 2012 Location: Olive Branch, Ms Posts: 742	Sound is so subjective. I'm happy with an axle back on my LS3. There's tons of videos on here so you can listen to the sound of each system, see what you like! But the mufflers on this thing are enormous, so just about anything you do will really improve the sound!

10-01-2013, 11:29 PM	#9
bonkotsu Drives: 2011 Camaro LS Join Date: Oct 2013 Location: Salem, VA Posts: 5	Think im sold on the MRT v2, I heard with axel back there is more cutting involved but it is cheaper, will it affect anything if i get the axel back then later down the road get x pipes or should i try to get it all at once?

10-02-2013, 01:07 AM	#13
KJS Drives: '10 RJT,'95&'14 Vette Join Date: Feb 2009 Location: Cut Throat, NY Posts: 1,722 View My Garage	welcome Nice Ride! Enjoy your six shooter! __________________ *"As ye sow, so shall ye reap" - Me* Mine at sunset

10-02-2013, 06:45 AM	#14
Sir Nuke Master of All Things Drives: '26 Corvette Stingray Join Date: Jul 2009 Location: Southeast of Houston, Texas Posts: 22,681 View My Garage	CONGRATS on your ride and Welcome to our happy little corner of the net, and to Camaro5. There is a BIG fridge on the back porch with anything you can think of in it...help yourself...of course only take what you can LEGALLY have. Make yourself at home on one of the big fluffy couches, kick your shoes off, put your feet up on one of the tables, yes we are allowed to do that, mom's, dad's, wives', husband's, girlfriend's and boyfriend's here don't care....and take it easy. oh...btw....every once in a while a food fight breaks out...so you may not want to wear nice clothes here. Welcome!! __________________