Ripshift or Hurst???? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

adk46r · 09-16-2009, 10:04 PM

OK guys (and gals) what do you think should I go with the Ripshift
www.ripshift.com/rip_home.html or should I go with the tried and true Hurst
that Nick has offered us on the group buy?

They are both the same price...actually the Ripshift is $349 and the Hurst $359. Just looking for your input! Thanks in advance.

caverman · 09-16-2009, 10:54 PM

Here is a question....looking at the RipShift install instructions it says you have to lower the trans. From what I remember the Hurst shifter didn't have to do that. Does anyone know if that is the case?

adk46r · 09-16-2009, 11:24 PM

From what jpsuperman81 posted (again) today all you should have to do is loosen up the cross member a bit to make the install a bit easier....

Quote:

Originally Posted by jpsuperman81

Let's clear up the confusion here> The shifter thats posted in this thread is HURST's Aftermarket version!. This shifter is made for those customers who bought a camaro and decided not to order the O.E> Hurst shifter with the car. They are (2) entirely different shifters!. To be clear: The hold up on the O.E> version of the Hurst shifter was not their doing, it is due largely in part to the situation at GM, plus some running changes that GM and Hurst had mutually agreed upon to "spice" up the design aspect of the shifter..nothing more!.. A decision was made by GM to move the O.E. shifter from the "accessory" division to the "line installed" division so there has been delay in getting that moved over with all the issues currently going on. The Aftermarket version (shown here) can be installed without removing the trans, only loosening the cross member a little to get better access.. The O.E> version has a complete "casting" as requested by GM and it is believed at this point the trans will need to be dropped to install that particular unit..hence the reason it is to be installed "on the line" or "at the dealer level"...so, that's the story

That was posted by subzero in the install thread

Bentley78 · 09-17-2009, 03:53 AM

Watched the throws on the ripshift site and they seemed kinda long...

RobertHarriSS · 09-17-2009, 07:38 AM

Quote:

Originally Posted by adk46r

OK guys (and gals) what do you think should I go with the Ripshift
www.ripshift.com/rip_home.html or should I go with the tried and true Hurst
that Nick has offered us on the group buy?

They are both the same price...actually the Ripshift is $349 and the Hurst $359. Just looking for your input! Thanks in advance.

Neither.
http://www.camaro5.com/forums/showth...&highlight=mgw

09-16-2009, 10:04 PM	#1
adk46r PROUD MARINE DAD! OORAH!! Drives: 2010 IOM 2SS/RS,1967 Murina Blue RS Join Date: Feb 2009 Location: Central Square, NY Posts: 169 View My Garage	Ripshift or Hurst???? OK guys (and gals) what do you think should I go with the Ripshift www.ripshift.com/rip_home.html or should I go with the tried and true Hurst that Nick has offered us on the group buy? They are both the same price...actually the Ripshift is $349 and the Hurst $359. Just looking for your input! Thanks in advance. __________________ Delivered 6/12/09 VIN#2G1FT1EW3A9112635!!!

09-16-2009, 10:54 PM	#2
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	Here is a question....looking at the RipShift install instructions it says you have to lower the trans. From what I remember the Hurst shifter didn't have to do that. Does anyone know if that is the case? __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hurst T-Handle on my hurst shifter	2SSRS@Gen5diy	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	51	10-07-2009 03:40 PM
Ripshift or Hurst????	adk46r	Interior Parts & Accessories	11	10-01-2009 12:17 PM
Hurst Camaro SEMA Showcar-image and details	TRooper	Camaro Photos \| Spyshots \| Video \| Media Gallery	48	09-25-2009 10:39 AM
Hennessey Performance Releases Shifter Option - RIPShift!	Sales@Hennessey	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	39	08-26-2009 12:52 AM
Hurst or Ripshift?	bobby35ny	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	14	08-20-2009 09:07 AM

09-17-2009, 03:53 AM	#4
Bentley78 Rice Cooker Drives: Avalanche Z/71, 2010 Camaro2SS Join Date: Jun 2008 Location: Hawaii/Phoenix Posts: 590	Watched the throws on the ripshift site and they seemed kinda long...