You are browsing camaro5 
 |
|
07-06-2019, 12:54 PM
|
#1 |
         
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 3,036
|
Delete
Delete
__________________
2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1 brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. Gen6 ZL1 brakes. Last edited by CamaroCracka; 09-25-2019 at 02:05 PM. |
|
|
|
07-06-2019, 01:01 PM
|
#2 |
 
Drives: 2015 camaro 2ss Join Date: Nov 2017
Location: Oregon
Posts: 215
|
Does this fit on a stock as rear end?
Sent from my iPhone using Tapatalk |
|
|
|
|
07-06-2019, 02:42 PM
|
#3 |
|
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 3,036
|
Yes, GM sells it as a kit to put on stock rear ends.
__________________
2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1 brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. Gen6 ZL1 brakes. |
|
|
|
|
07-07-2019, 03:15 AM
|
#4 |
 
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,148
|
I have a Z Diff in my SS an need just the lines that go into the diff it self not the whole set up. If you don't want or need them please let me know.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
