12-31-2013, 12:40 PM | #1 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Finally!! CamaroI Build Thread Begins!! IOM Camaro [COTW 2/10/14]
Finally decided to post a build journal...Searching everywhere for photos when first brought home but having difficulty finding.
Here is what is done so far----- Cosmetic Mods-- --DCT Motor Sports Custom Steering Wheel in Carbon Fiber/Leather --3D Carbon Fender Vents --ACS Hood Vents --Hex Hood Vents --Revolution Reverse Hood Kit --Zl1 front end conversion from Garys Customz --Black out front Big worm Graphix --Javelin Spear Stipe Big Worm Graphix --Red Calipers Mike Powder Coating --R1 Slotted drilled Rotors --Rhonana RC-5 Matte Black Wheels 20x10.5 with Vreds from Best Wheels --Painted IOM antenna Lupe at overhaulengines --Heritage Grill Matte Black painted by Fender Mender Keller Tx --Concept Mirrors from Blacky Hydro Dipped --Custom painted rear LED Bow tie from AAC painted by Lupe --Jarheadbobandmax.com Custom Trunk Lid Panel --ZL1 Rockers Matte Black --BMR Coilovers installed by Whiteside Customz Dallas --GM High Wing Spoiler with Matte Black Posts Painted by Fender Mender --Rear trunk black out panel Big Worm Graphics --CAMARO Windshield Sticker --Ghost Armor Radio Cover --CFD Short Brushed Aluminum Shifter --Epco Rally Orange SS Shift Knob --Custom Shifter Paddles hydro dip --SLP Concept Rear Diffuser --Complete Showstopper Engine Dress Kit with Hydro Dip inserts --Custom Engine Caps IOM along with black --Matte Black Tail light bezels painted by Lupe --LED Side Markers painted/tinted by AAC --Nitros Purge system which purges from Sides of 3d Carbon Vents --APR Splitter --Wire Harness Cover Hydro dipped --Fender well covers (IOM) --Hydro Dip Raiator Cover --Hydro Dip Windshield Cover --RP1 ZL1 Mud flaps Lighting----All lighting is control by The Night Owl System along with Cup holder switch plate from Emblem Pros and Monster Switch Center Console. --Headlight RGB Halos (AAC) --Headlight RGB Demon Eyes (AAC) --Fog Light RGB Halos (AAC) --High Intensity bulbs for fogs and DRL 2GenDYI --RGB Grill Lighting (AAC) --Red Engine Lighting (AAC) --Red Door Sill Lighting (AAC) --Red Footwell Lighting (AAC) --RGB Under Glow Strips (AAC) --RGB Fender Lighting (AAC) --Red Trunk Lighting for JarHead panel --Wheel Lighting RGB --Cup Holder Lighting (RGB) --After Burner LEDs (AAC) Performance Mods--Thanks to Andy At ADM---Dyno 726 at the Fly and over 600 RWHP --Whipple 2.9 --American Racing Headers --Cam GT11 --Magnaflow Exhaust --ADM CAI --3:45 Gearing --Auto Meter Dual Gauge Pod --Pro Sport Evo Boost Gauge --Pro Sport Evo Air Fuel Ratio Gauge **Not really a performance mod but QTP electric cutouts** In production--- --Relocation of Gas Cap to upper fender using Viper cap. Upcoming-- --Focal Speaker package along with Amps/Subs (to be decided) --Custom Trunk Enclosure for Sound System --Custom Made Hood similar to current design --Full Leather Center Console Here is how she sits now----Going to post pics of mods listed above being installed or installed along the way. It has been a Transformation from one vision to the final vision shown below. Sorry for starting build post late in the game. If anyone has questions feel free to ask. Last edited by CamaroI; 04-18-2014 at 07:48 PM. |
12-31-2013, 12:50 PM | #2 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Once I took delivery in 2010 the Mod bug hit hard. Living in Fort Worth it was a challenge to find a Custom Shop who specialized in lighting and cosmetic type mods. Luckily was able to hook up with Scorpion Customz in North Richland Hills. Owner and mechanic Craig went straight to work installing Halo lighting, 3d Carbon Vents, Reverse Hood, Lambo Doors and Emblem pros Cup holder Switch plate along with Monster Switches for center console. Craig also came up with the idea of Nitrous Purge from 3 D Vents. Cut me a killer deal on entire install!!
Lambos going in Little bit of wiring |
12-31-2013, 12:53 PM | #3 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
So this was the early stage of having mods done. As you can see Lambos done along with Reverse hood and 3D Vents. Lighting completed at this stage was Halos on headlights and fogs, Grill lighting, Scanner Light and footwells.
|
12-31-2013, 12:58 PM | #4 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Another mod soon after above pic was the Trunk Panel from Jarhead...At the time Jarhead was starting to do more and more with LED lights as seen below. I was able to get a great deal on this as well. This is prior to GM requiring Jarhead to place a Center cut out for trunk release.
Final Install |
12-31-2013, 01:07 PM | #5 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Yet another early mod was the Drake Shifter shown below. Loved using the shifter. However, in the last month member CFD created for me a Short Aluminum Brushed shifter to work with my L99 with GM Leather Boot. CFD was great to work with!! I highly recommend this product and included a video below in action. CFD customer service is top notch. I requested a short shifter design from his current longer version. In a matter of days he produced a shifter with install instructions for me to purchase!!!! Now that is a Vendor for you!!!!
Photos of Drake Shifter for Build Thread-- CFD Short Shifter Currently/Recently Installed with Video-- http://youtu.be/uJdDdBTts6M |
12-31-2013, 01:17 PM | #6 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Here is another early on pic....In this photo had the Heritage grill painted IOM from Garys Customz along with SS badge on Grill. Seems like forever ago. Painted Fog Light Bezels as well by Lupe
AAC Side Markers also shown along with little IOM bowties on wheels from Big Worm Graphics |
12-31-2013, 06:08 PM | #7 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
This was when I had Some ACS parts installed which include ACS pod Lighting along with ACS lower fender cutouts. SLP splitter also installed.
I have since gone to the Zl1 front end which I think looks much more aggressive IMO |
12-31-2013, 06:11 PM | #8 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Photo of the Nitros Purge in Action. To bad she wasn't wearing a skirt. This was at a local Twin Peaks Show and purged triggered from remote.
|
12-31-2013, 06:17 PM | #9 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
This was taken right after SLP Concept Diffuser installed. It was painted a flat black by Fender Mender In Keller Tx. They also painted black post on the High Wing.
High wing was installed which involved filling in trunk holes from OEM SS spoiler. |
12-31-2013, 06:21 PM | #10 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
This is before and after pics of engine bay..
Before seeing Andy at ADM which included showstopper dress up and Roto fab engine covers Current Setup after Andy working his magic. Still working on final look for the engine bay, but have squared away by Camaro Fest. Open for suggestion on engine bay...Would love to have a cover for radiator from Show stopper to cover radiator since Whipple install. |
12-31-2013, 06:28 PM | #11 |
|
Those are some really nice changes, the car looks great.
__________________
Todd in Vancouver
'14 ZL1 Camaro '67 Camaro SS Pro-tour in process How hard can it be... Check out my other build http://www.pro-touring.com/threads/9...ject-Obsession |
12-31-2013, 06:29 PM | #12 | |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Quote:
|
|
12-31-2013, 06:53 PM | #13 |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
Great build
|
12-31-2013, 06:57 PM | #14 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Thanks Black Night for stopping by. Have a Happy New Year!!
|
|
|
|
|