03-24-2023, 07:44 PM | #1 |
Drives: 2010 Camaro 2SS/RS Join Date: Feb 2023
Location: Md
Posts: 6
|
295/35R20 Front? 315/35R20 Rear?
I have MRR M755 20x10+23 fronts and 20x11+43 rears. My question is will 295/35R20's work with no issues? I'm ar factory height. I ordered Nitto NT555 G2's and they were just shipped today. Thought I had all.my ducks in a row, but then I was told I should've went with 295/30's and 315/30's. I have read They will work no problem, then I have read they will not work, they will rub. I know the brake cable needs to be zip-tied in the rear. Any help is appreciated. And before anyone says it, I have searched and this forum's search function will not work on my phone.
|
03-25-2023, 11:29 AM | #2 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
With those width and offset wheels you should be alright. I had 285/35/20's on the front on my MRR M228's, 10 wide and +23 with no issues and lowered 1.25, on the rear I had 315/35/20's on the MRR M228's, 11 wide and +43, then I had tried a set of 335/30/20's on the rear but didn't like the way the sidewalls looked, so went back to the 315/35's. More square looking. You being still stock ride height, you shouldn't have to tie back anything on the rear, I didn't have to, even lowered..
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
03-26-2023, 09:04 AM | #3 |
Drives: 2013 ZL1 Join Date: Nov 2018
Location: Mobile Al
Posts: 302
|
Why?
There is no more grip running that size tire as the outer edges of the tire aren't on the ground. You are carrying around tire you can't use and they will prematurely wear out the center of the tire. The 5th gen ZL1 runs a 285/35/20 on front and a 305/35/20 on the rear on those size wheels. Can you run them? Sure you can, no advantage to doing it though. The 30 series sidewall looks goofy and small on a 5th gen to me.
__________________
2013 ZL1 M6, 2.4 pulley and a few bolt ons. 590 wheel and 11.70@122 on a hard tire.
|
03-26-2023, 09:57 AM | #4 | |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,485
|
Quote:
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
|
|
|