11-03-2013, 09:00 AM | #1 |
Gear change 345
Hey guys, helped a buddy change his three weeks ago. Tuesday its my turn. Since then he has not had traction control, ABS etc. Was wondering if the same would happen to mine. And if so how do u fix it?
Sent from my DROID RAZR using Tapatalk
__________________
Mods- Top Speed 3" LT headers catless, 3" Top Speed Catback, Tuned at ADM, Cold Air Inductions CAI, Elite catch can, ADM racing scoop
Interior-(amber) interior dome, trunk, port custom sub box, 10" sub, 1000watt kenwood amp, sumbthump harness, CDF short shifter, epco shift knob, vitesse paddle shifters Exterior (amber)-mailslot scanner, grill illumnation kit, halos, fog halos, drl nightime harness, Rear Led bowtie. Painted Heritage grill, hex vents Body-removed stock decals had painted in inferno orange |
|
11-03-2013, 01:28 PM | #2 |
Account Suspended
Drives: 2010 2SS/RS Red Jewel L99 Join Date: Jun 2011
Location: NB,Canada
Posts: 834
|
Did he change the tune to accept the 3.45 ?
|
11-03-2013, 02:55 PM | #3 |
|
Sound like a speed sensor wire got damaged. No lights should come on after a gear swap unless something is damaged. And not updating the tune will not cause lights either, just the speedometer to be off.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
|
11-04-2013, 06:19 AM | #4 |
He put in 3.91. And not as of yet. Where is that wire located? Only one we seen(hose) was on top of the diffrential and when we tracked it back it wasnt connected to anything.
Sent from my DROID RAZR using Tapatalk
__________________
Mods- Top Speed 3" LT headers catless, 3" Top Speed Catback, Tuned at ADM, Cold Air Inductions CAI, Elite catch can, ADM racing scoop
Interior-(amber) interior dome, trunk, port custom sub box, 10" sub, 1000watt kenwood amp, sumbthump harness, CDF short shifter, epco shift knob, vitesse paddle shifters Exterior (amber)-mailslot scanner, grill illumnation kit, halos, fog halos, drl nightime harness, Rear Led bowtie. Painted Heritage grill, hex vents Body-removed stock decals had painted in inferno orange |
|
11-04-2013, 08:41 AM | #5 |
|
Speed sensor wire runs to the hubs. The hose you mention is a vent hose.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
|
|
|
|
|