LS3 Oil cooler Torque Spec - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

oachalon · 09-06-2010, 09:32 PM

Could anyone that has access to SI please get me the correct torque spec for the oil cooler. Mine is leaking a little bit and i believe its from the bolts being a little loose. I want to follow gm's torque spec.

I also believe this is a problem for quite a few on here and would be very helpful for everyone.

Thanks

thiggin2 · 09-06-2010, 10:08 PM

There are 2 different specs. See attached pic

.

TeddyP25 · 09-06-2010, 10:08 PM

Sorry dont have torque specs, but mine was leaking and dealer covered the seal rings under warranty without a prob, even tho I'm Sc'd.

oachalon · 09-07-2010, 05:42 PM

thanks for the help.

09-06-2010, 09:32 PM	#1
oachalon Drives: 2010 Camaro 1SS Join Date: Mar 2009 Location: Mentor, Ohio Posts: 999 View My Garage	LS3 Oil cooler Torque Spec Could anyone that has access to SI please get me the correct torque spec for the oil cooler. Mine is leaking a little bit and i believe its from the bolts being a little loose. I want to follow gm's torque spec. I also believe this is a problem for quite a few on here and would be very helpful for everyone. Thanks

09-06-2010, 10:08 PM	#2
thiggin2 Drives: 05/07 Chevy's Join Date: Aug 2009 Location: Florida Posts: 392	There are 2 different specs. See attached pic . Attached Images

09-06-2010, 10:08 PM	#3
TeddyP25 Drives: 2SS Join Date: May 2009 Location: Fort Collins Posts: 611	Sorry dont have torque specs, but mine was leaking and dealer covered the seal rings under warranty without a prob, even tho I'm Sc'd. __________________ 2SS/RS CGM/BLK GFX MN6418 Stroker.785rwhp/885lbtq.50 SHOT NO2..Pfadt arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.E-FORCE SC.8 rib IW 10%OD.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX MONSTER CatchCan.DSS axels/DS.Hammerhead rear, 3:73's. WYOSPEED builthttp://www.camaro5.com/forums/showthread.php?t=115687

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2010 Camaro V6 Oil and Oil Filter Change	azamazonqueen	Camaro DIY & HOW-TO instructions & discussions	116	03-19-2017 02:36 PM
My V6 oil change experience	convert	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	38	04-08-2014 05:15 PM
SPEC Clutch/Flywheel Upgrades \| Single & Twin Disc!!	AJ@ECSMotorsports	Transmission / Driveline	21	11-13-2010 04:58 PM
BP Makes "Giant" Oil Find in Gulf of Mexico	KILLER74Z28	General Automotive + Other Cars Discussion	1	09-02-2009 08:39 PM
Major U.S. oil source is tapped	KILLER74Z28	Off-topic Discussions	32	10-30-2007 10:47 AM

09-07-2010, 05:42 PM	#4
oachalon Drives: 2010 Camaro 1SS Join Date: Mar 2009 Location: Mentor, Ohio Posts: 999 View My Garage	thanks for the help.