CAR REMOTE FOR NITE-RIDER - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2011SS · 09-29-2010, 09:55 AM

Here's something cool for those who installed the Nite Rider v 2.0 LED light. The 3 buttons on the overhead console (if you have these) can learn the buttons on the Nite Rider keychain remote. I programmed one for (D) on/off, the next for (B) color and the third for (C) pattern. This work's great for me since I don't have a garage and hate to have buttons with no purpose. In some situations I find it easier to use the overhead buttons instead of the keychain remote. (Of course we would never operate this light in traffic).

vuduman67 · 09-29-2010, 10:01 AM

That is freakin awesome! I will be trying this very soon.Thanks alot for the Tip!

ineedjava · 09-29-2010, 10:07 AM

2011ss, thank you.

rareslick · 09-29-2010, 11:34 AM

Kool!! Do u have a simple step on how to?

2011SS · 09-29-2010, 01:46 PM

To program the 3 buttons is pretty easy.

* Hold down the two outside buttons for about 20 seconds to clear all buttons from any previously stored code. (The red led on the overhead console will blink fast when finished).

* Hold the Nite Rider remote very close to the three buttons on the overhead console. Hold down the button you want to learn on the console and also hold the button on the Nite Rider remote you want to copy (The red led blinks slow when you start and when it is finished it blinks rapidly, now release both buttons)

* Repeat for the other two.

* Enjoy !

rareslick · 09-29-2010, 02:00 PM

Quote:

Originally Posted by 2011SS

To program the 3 buttons is pretty easy.

* Hold down the two outside buttons for about 20 seconds to clear all buttons from any previously stored code. (The red led on the overhead console will blink fast when finished).

* Hold the Nite Rider remote very close to the three buttons on the overhead console. Hold down the button you want to learn on the console and also hold the button on the Nite Rider remote you want to copy (The red led blinks slow when you start and when it is finished it blinks rapidly, now release both buttons)

* Repeat for the other two.

* Enjoy !

Thanks do u think it would work with other remotes? I have another led kniterider I bought of eBay which the remote is not all that good

Dave2SSRS · 09-29-2010, 02:17 PM

Holy crap man!!! AWESOME!!!!!!!!!!!!!!!

Thanks 2011SS!!!!

Dave

2011SS · 09-29-2010, 02:44 PM

Go to http://www.homelink.com/program_instruct.php for more detail programming instruction. Try your other brand remote, if it work's great.

FINALLYSATISFIED · 09-29-2010, 02:58 PM

You definately have to show us a video of this! I need to put my scanner back in, but the weather is so damn bad over here, its been raining the past few days constantly!

vuduman67 · 09-29-2010, 07:07 PM

You dont need a video your manual tells you how to do it for a garage door opener. You just substitute the garage door opener with the scanner remote and your done!

camaro2lt · 09-29-2010, 10:08 PM

I juat went in my garage and did it and it works greattt if you guys need any help pm me and ill walk you threw it

09-29-2010, 09:55 AM	#1
2011SS Drives: 2011 2SS/RS A6 Join Date: Aug 2010 Location: Middle River, Md. Posts: 128	CAR REMOTE FOR NITE-RIDER Here's something cool for those who installed the Nite Rider v 2.0 LED light. The 3 buttons on the overhead console (if you have these) can learn the buttons on the Nite Rider keychain remote. I programmed one for (D) on/off, the next for (B) color and the third for (C) pattern. This work's great for me since I don't have a garage and hate to have buttons with no purpose. In some situations I find it easier to use the overhead buttons instead of the keychain remote. (Of course we would never operate this light in traffic).

09-29-2010, 10:07 AM	#3
ineedjava Drives: 2010 Camaro rs/ss Join Date: Jun 2010 Location: toronto Posts: 111	which scanner do you have? 2011ss, thank you.

09-29-2010, 02:17 PM	#7
Dave2SSRS Drives: 2010 Camaro 2SS/RS Join Date: Mar 2010 Location: Houston, TX Posts: 487	Holy crap man!!! AWESOME!!!!!!!!!!!!!!! Thanks 2011SS!!!! Dave __________________ 2010 Camaro 2SS/RS Imperial Blue \| Grey two-tone Interior \| Silver racing stripes \| Magnaflow Comp Cat-back \| CAI intake \| Elite Engineering Tunnel Brace \| Richmond (Houston), TX

09-29-2010, 10:08 PM	#11
camaro2lt Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009 Location: Palmyra, PA Posts: 5,675 View My Garage	I juat went in my garage and did it and it works greattt if you guys need any help pm me and ill walk you threw it __________________ Email: rdurso1@yahoo.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Washing/Detailing for Newbies	MRK III Z28	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	124	02-05-2024 10:55 PM
Winner, winner - Jalopnik compares the Big 3	Number 3	5th Gen Camaro SS LS LT General Discussions	31	04-17-2011 04:24 PM
From my first car to my dream car...	MissingtheMrs.	5th Gen Camaro SS LS LT General Discussions	21	04-11-2011 11:20 PM
What's considered a Muscle Car?	SyN	General Automotive + Other Cars Discussion	125	09-25-2010 01:04 AM
Car Cover	domano 68	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	19	05-21-2010 10:51 PM

09-29-2010, 10:01 AM	#2
vuduman67 Drives: Victory Red 2SS/RS Join Date: Jun 2009 Location: Highland, IN Posts: 330	That is freakin awesome! I will be trying this very soon.Thanks alot for the Tip!

09-29-2010, 11:34 AM	#4
rareslick Drives: IOM 2SS Join Date: Sep 2009 Location: longview Posts: 476	Kool!! Do u have a simple step on how to?

09-29-2010, 01:46 PM	#5
2011SS Drives: 2011 2SS/RS A6 Join Date: Aug 2010 Location: Middle River, Md. Posts: 128	To program the 3 buttons is pretty easy. * Hold down the two outside buttons for about 20 seconds to clear all buttons from any previously stored code. (The red led on the overhead console will blink fast when finished). * Hold the Nite Rider remote very close to the three buttons on the overhead console. Hold down the button you want to learn on the console and also hold the button on the Nite Rider remote you want to copy (The red led blinks slow when you start and when it is finished it blinks rapidly, now release both buttons) * Repeat for the other two. * Enjoy !

09-29-2010, 02:44 PM	#8
2011SS Drives: 2011 2SS/RS A6 Join Date: Aug 2010 Location: Middle River, Md. Posts: 128	Go to http://www.homelink.com/program_instruct.php for more detail programming instruction. Try your other brand remote, if it work's great.

09-29-2010, 02:58 PM	#9
FINALLYSATISFIED Est.1775 Drives: '15 Challenger Hellcat (sold) Join Date: Sep 2009 Location: SoCal Posts: 5,499	You definately have to show us a video of this! I need to put my scanner back in, but the weather is so damn bad over here, its been raining the past few days constantly!

09-29-2010, 07:07 PM	#10
vuduman67 Drives: Victory Red 2SS/RS Join Date: Jun 2009 Location: Highland, IN Posts: 330	You dont need a video your manual tells you how to do it for a garage door opener. You just substitute the garage door opener with the scanner remote and your done!