514 c.i. Ford W/ Edlebrock RPM stage 3 heads - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Turbo99 · 06-12-2011, 08:44 PM

I have a 514 c.i. Ford engine with the Eagle H-beams and crank, with Edlebrock RPM heads with a stage 3 port job from Keith Craft Racing. The engine has a middle of the road hydraulic roller cam aggressive but street able. The engine is set up for pump gas.

The engine has under 15hrs on it.I had the engine in a mud truck and the oil pump housing cracked and lost oil pressure, it was immediately shut down and I have it torn apart now, but ready to go back together all parts were inspected and check at the machine shop and nothing was hurt, as I expected as the bearings were still ok in it.The engine/heads can make 700+ with a cam swap only, the cam in it is prolly close to 575-600hp engine. I have over $10k in this setup from carb to oil pan. And it comes with all the accessories water pump,front cover, 10qt oil pan rear sump flex plate ,MSD distributor and Stealth intake and a Holley 950 HP Pro series carb.

Needing $6000, all it needs is reassembly. I am located in Florida for pick up or will drive up to 150 miles, or you can pay for shipping.

I have pics when I assembled it the first time, but can get pics of it now but it all looks the same just alittle carbon on the pistons and valves now.
Please serious offers only.

Seling to fund my new toy...2010 Supercharged Camaro
Thank you,
Jeremy
__________________

Turbo99 · 06-13-2011, 09:42 AM

Turbo99 · 06-14-2011, 01:07 PM

Bump up for offers, will separate

06-12-2011, 08:44 PM	#1
Turbo99 Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010 Location: Gainesville,Fl Posts: 1,362 View My Garage	514 c.i. Ford W/ Edlebrock RPM stage 3 heads I have a 514 c.i. Ford engine with the Eagle H-beams and crank, with Edlebrock RPM heads with a stage 3 port job from Keith Craft Racing. The engine has a middle of the road hydraulic roller cam aggressive but street able. The engine is set up for pump gas. The engine has under 15hrs on it.I had the engine in a mud truck and the oil pump housing cracked and lost oil pressure, it was immediately shut down and I have it torn apart now, but ready to go back together all parts were inspected and check at the machine shop and nothing was hurt, as I expected as the bearings were still ok in it.The engine/heads can make 700+ with a cam swap only, the cam in it is prolly close to 575-600hp engine. I have over $10k in this setup from carb to oil pan. And it comes with all the accessories water pump,front cover, 10qt oil pan rear sump flex plate ,MSD distributor and Stealth intake and a Holley 950 HP Pro series carb. Needing $6000, all it needs is reassembly. I am located in Florida for pick up or will drive up to 150 miles, or you can pay for shipping. I have pics when I assembled it the first time, but can get pics of it now but it all looks the same just alittle carbon on the pistons and valves now. Please serious offers only. Seling to fund my new toy...2010 Supercharged Camaro Thank you, Jeremy __________________ __________________ 08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph 10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets

06-13-2011, 09:42 AM	#2
Turbo99 Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010 Location: Gainesville,Fl Posts: 1,362 View My Garage	__________________ 08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph 10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets

06-14-2011, 01:07 PM	#3
Turbo99 Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010 Location: Gainesville,Fl Posts: 1,362 View My Garage	Bump up for offers, will separate __________________ 08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph 10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FORD to break even or profit by 2011!!	ArcAngel	General Automotive + Other Cars Discussion	9	05-15-2009 11:47 AM
Edmunds: 2010 Ford Mustang First Look	Scotsman	General Automotive + Other Cars Discussion	32	11-23-2008 10:55 PM
Ford delays launch of new F-150	KILLER74Z28	General Automotive + Other Cars Discussion	3	06-20-2008 02:37 PM
Ford Flex: Reclaiming land lost to imports, from coast to coast	Scotsman	General Automotive + Other Cars Discussion	0	04-16-2008 01:56 AM
Financial Problems for Ford???	TAG UR IT	General Automotive + Other Cars Discussion	14	10-29-2006 07:17 PM