2011 Camaro SS/RS 2700 miles PERFECT!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

hollandtwin27SS · 09-14-2011, 12:42 PM

Hi everyone,

I am gauging interest in my 2011 VR SS with extended painted in artic pearl stripes and has always been garage kept. If you would like to know more PM me. The car was built by ETMC and was spaired no detail. It has a upgraded suspension as well. Custom Katzkin leather, hurst billet 2 shifter, and lots of power. You can see the video of my car on YouTube on the ETMC channel. Its an amazing car that's been completely garage kept and not driven hardly at all being I have been deployed since I bought the the car new. I am the original owner. I bought the car from Peltier Chevrolet in Tyler, Texas. Most all the mods are listed in my signature and I will email pics upon request. I was hoping to get at least $35,000 being the car still even smells new and the bumper has never been drilled on the front. Not to mention all the awesome mods. All hand car washes and detailed only by Adams products. It is just sitting in the garage (my wife can't drive a standard).I'll try to post up some pics. By the way I have the old cam, pushrods, valve springs, CAI, LCAs, Springs and prett much everything that came off the car. As well as receipts and dyno graphs for all parts and work performed. WeatherTech custom fit floor mats, trunk mat.

hollandtwin27SS · 09-14-2011, 12:56 PM

Sorry the interior pic isnt that great, by the way they are victory red seats to match the exterior pic was taken in sunset so it looks orange . Its the only one I had. I am in Afghanistan right now

hollandtwin27SS · 09-15-2011, 11:03 AM

Make offers any will be considered.

toesuf94 · 09-15-2011, 11:15 AM

Wait...you have a VR car with IO seats? Did not know that was possible.

2010 SSRS · 09-15-2011, 11:18 AM

Very nice, good luck

hollandtwin27SS · 09-15-2011, 11:53 AM

No. They are victory red as well. The pic was taken in the sunset so it looks orange. Why would I put Orange seats in a red car? That would make no sense. It's possible but they are not orange. I even commented that the interior pic was not that great. Read

toesuf94 · 09-15-2011, 12:48 PM

Quote:

Originally Posted by hollandtwin27SS

No. They are victory red as well. The pic was taken in the sunset so it looks orange. Why would I put Orange seats in a red car? That would make no sense. It's possible but they are not orange. I even commented that the interior pic was not that great. Read

Sorry about that. I just re-read the post - hard to work and surf at the same time....need to quit working.

Very sweet car. GLWS

Sevn86 · 09-15-2011, 01:00 PM

Im assuming it's a 1SS?

hollandtwin27SS · 09-15-2011, 01:22 PM

It is but with most every option. Power everything.

Blownhotrodder · 09-15-2011, 04:52 PM

I know your int. is red but you could get the orange int in a red car from the factory. GLWS

hollandtwin27SS · 09-16-2011, 03:37 AM

True but that would be a terrible choice on a red car. Thats Katzkin leather. Bit better than OEM IMO.

hollandtwin27SS · 09-17-2011, 03:05 AM

No interest?

hollandtwin27SS · 09-18-2011, 07:07 AM

eBay probably? I guess most people on here already own one. Lol

Sevn86 · 09-19-2011, 06:29 PM

Try ebay or autotrader! GLWS!

09-14-2011, 12:42 PM	#1
hollandtwin27SS Drives: 2011 Camaro SS VR/w pw stripes Join Date: Feb 2011 Location: Sulphur Springs, TX Posts: 95 View My Garage	2011 Camaro SS/RS 2700 miles PERFECT!! Hi everyone, I am gauging interest in my 2011 VR SS with extended painted in artic pearl stripes and has always been garage kept. If you would like to know more PM me. The car was built by ETMC and was spaired no detail. It has a upgraded suspension as well. Custom Katzkin leather, hurst billet 2 shifter, and lots of power. You can see the video of my car on YouTube on the ETMC channel. Its an amazing car that's been completely garage kept and not driven hardly at all being I have been deployed since I bought the the car new. I am the original owner. I bought the car from Peltier Chevrolet in Tyler, Texas. Most all the mods are listed in my signature and I will email pics upon request. I was hoping to get at least $35,000 being the car still even smells new and the bumper has never been drilled on the front. Not to mention all the awesome mods. All hand car washes and detailed only by Adams products. It is just sitting in the garage (my wife can't drive a standard).I'll try to post up some pics. By the way I have the old cam, pushrods, valve springs, CAI, LCAs, Springs and prett much everything that came off the car. As well as receipts and dyno graphs for all parts and work performed. WeatherTech custom fit floor mats, trunk mat. __________________ ETMC Stage 3 with Stage 2 Blower cam,Valve Spring upgrade to Dual Valve Springs,lifters,pushrods, BFE 1 7/8 headers to 3" pipe non catted, Corsa Exhaust, PP Throttle Body,RotoFab CAI,Elite Engineering Catch Can,Pfadt springs, sways, lower control arms, Hotchkis Maxx Brace.474RWHP. Hendrix Twin Carbon Clutch Kit, One piece aluminum DriveShaft. Last edited by hollandtwin27SS; 09-14-2011 at 10:54 PM. Reason: Add pics

09-14-2011, 12:56 PM	#2
hollandtwin27SS Drives: 2011 Camaro SS VR/w pw stripes Join Date: Feb 2011 Location: Sulphur Springs, TX Posts: 95 View My Garage	PICS Sorry the interior pic isnt that great, by the way they are victory red seats to match the exterior pic was taken in sunset so it looks orange . Its the only one I had. I am in Afghanistan right now Attached Images __________________ ETMC Stage 3 with Stage 2 Blower cam,Valve Spring upgrade to Dual Valve Springs,lifters,pushrods, BFE 1 7/8 headers to 3" pipe non catted, Corsa Exhaust, PP Throttle Body,RotoFab CAI,Elite Engineering Catch Can,Pfadt springs, sways, lower control arms, Hotchkis Maxx Brace.474RWHP. Hendrix Twin Carbon Clutch Kit, One piece aluminum DriveShaft. Last edited by hollandtwin27SS; 09-15-2011 at 11:55 AM.

09-15-2011, 11:03 AM	#3
hollandtwin27SS Drives: 2011 Camaro SS VR/w pw stripes Join Date: Feb 2011 Location: Sulphur Springs, TX Posts: 95 View My Garage	Make offers any will be considered. __________________ ETMC Stage 3 with Stage 2 Blower cam,Valve Spring upgrade to Dual Valve Springs,lifters,pushrods, BFE 1 7/8 headers to 3" pipe non catted, Corsa Exhaust, PP Throttle Body,RotoFab CAI,Elite Engineering Catch Can,Pfadt springs, sways, lower control arms, Hotchkis Maxx Brace.474RWHP. Hendrix Twin Carbon Clutch Kit, One piece aluminum DriveShaft.

09-15-2011, 11:15 AM	#4
toesuf94 Drives: THR #11 E-force supercharged Join Date: Jul 2008 Location: Cedar Rapids, IA Posts: 4,746	Wait...you have a VR car with IO seats? Did not know that was possible. __________________ Cars and women are both going to give you problems...but you can pay somebody else to fix your car!

09-15-2011, 11:18 AM	#5
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	Very nice, good luck __________________ Jannetty Racing JRE Street Package

09-15-2011, 11:53 AM	#6
hollandtwin27SS Drives: 2011 Camaro SS VR/w pw stripes Join Date: Feb 2011 Location: Sulphur Springs, TX Posts: 95 View My Garage	No. They are victory red as well. The pic was taken in the sunset so it looks orange. Why would I put Orange seats in a red car? That would make no sense. It's possible but they are not orange. I even commented that the interior pic was not that great. Read __________________ ETMC Stage 3 with Stage 2 Blower cam,Valve Spring upgrade to Dual Valve Springs,lifters,pushrods, BFE 1 7/8 headers to 3" pipe non catted, Corsa Exhaust, PP Throttle Body,RotoFab CAI,Elite Engineering Catch Can,Pfadt springs, sways, lower control arms, Hotchkis Maxx Brace.474RWHP. Hendrix Twin Carbon Clutch Kit, One piece aluminum DriveShaft.

09-15-2011, 01:22 PM	#9
hollandtwin27SS Drives: 2011 Camaro SS VR/w pw stripes Join Date: Feb 2011 Location: Sulphur Springs, TX Posts: 95 View My Garage	It is but with most every option. Power everything. __________________ ETMC Stage 3 with Stage 2 Blower cam,Valve Spring upgrade to Dual Valve Springs,lifters,pushrods, BFE 1 7/8 headers to 3" pipe non catted, Corsa Exhaust, PP Throttle Body,RotoFab CAI,Elite Engineering Catch Can,Pfadt springs, sways, lower control arms, Hotchkis Maxx Brace.474RWHP. Hendrix Twin Carbon Clutch Kit, One piece aluminum DriveShaft.

09-15-2011, 04:52 PM	#10
Blownhotrodder Drives: 2018 ZL1 1LE Join Date: Dec 2008 Location: Clarkesville , GEORGIA Posts: 1,857	I know your int. is red but you could get the orange int in a red car from the factory. GLWS

09-16-2011, 03:37 AM	#11
hollandtwin27SS Drives: 2011 Camaro SS VR/w pw stripes Join Date: Feb 2011 Location: Sulphur Springs, TX Posts: 95 View My Garage	True but that would be a terrible choice on a red car. Thats Katzkin leather. Bit better than OEM IMO. __________________ ETMC Stage 3 with Stage 2 Blower cam,Valve Spring upgrade to Dual Valve Springs,lifters,pushrods, BFE 1 7/8 headers to 3" pipe non catted, Corsa Exhaust, PP Throttle Body,RotoFab CAI,Elite Engineering Catch Can,Pfadt springs, sways, lower control arms, Hotchkis Maxx Brace.474RWHP. Hendrix Twin Carbon Clutch Kit, One piece aluminum DriveShaft.

09-17-2011, 03:05 AM	#12
hollandtwin27SS Drives: 2011 Camaro SS VR/w pw stripes Join Date: Feb 2011 Location: Sulphur Springs, TX Posts: 95 View My Garage	No interest? __________________ ETMC Stage 3 with Stage 2 Blower cam,Valve Spring upgrade to Dual Valve Springs,lifters,pushrods, BFE 1 7/8 headers to 3" pipe non catted, Corsa Exhaust, PP Throttle Body,RotoFab CAI,Elite Engineering Catch Can,Pfadt springs, sways, lower control arms, Hotchkis Maxx Brace.474RWHP. Hendrix Twin Carbon Clutch Kit, One piece aluminum DriveShaft.

09-18-2011, 07:07 AM	#13
hollandtwin27SS Drives: 2011 Camaro SS VR/w pw stripes Join Date: Feb 2011 Location: Sulphur Springs, TX Posts: 95 View My Garage	eBay probably? I guess most people on here already own one. Lol __________________ ETMC Stage 3 with Stage 2 Blower cam,Valve Spring upgrade to Dual Valve Springs,lifters,pushrods, BFE 1 7/8 headers to 3" pipe non catted, Corsa Exhaust, PP Throttle Body,RotoFab CAI,Elite Engineering Catch Can,Pfadt springs, sways, lower control arms, Hotchkis Maxx Brace.474RWHP. Hendrix Twin Carbon Clutch Kit, One piece aluminum DriveShaft.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transcript of Camaro ZL1 Q&A Webchat with Chevrolet	Tran	Camaro ZL1 Forum - ZL1 Specific Topics	42	12-22-2017 05:42 AM
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 10:27 PM
/ \ * FREE SHIPPING ON ALL 2011 CAMARO'S - PREFERRED PRICING FOR EVERYONE * / * \ *	CamaroScotty	Dealer Camaros for Sale	1	11-06-2010 11:27 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	338	04-15-2009 06:33 PM