AAC Colorshift 2.0 Install HELP - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

lscamaro · 01-31-2012, 08:02 PM

Ok so I bought a set of aac halos and cant seem to find a way to make them fit in the housings. They are for a non rs. Any tips? This is all I could do and am completely stumped right now :(

lscamaro · 02-01-2012, 12:29 AM

Any suggestions? No one?

Chad's ZL1 · 02-01-2012, 01:25 AM

wait till morning. AAC will chime in.

Support@OracleLights.com · 02-01-2012, 10:14 AM

I will post a picture of how they are supposed to be mounted shortly.

Support@OracleLights.com · 02-01-2012, 10:28 AM

You are going to want to mount the ring "forward" onto the Non RS housing; not on the scatter-shield on the back of the light.

You will want to use a few dots of silicone or two part epoxy to hold the ring in place.

Back View:

Back View:

Front View:

lscamaro · 02-01-2012, 11:26 AM

Thank you for the help, ill post back if I run into any other problems

lscamaro · 02-01-2012, 04:35 PM

I got it figured out, thanks for the help AAC!!!

Support@OracleLights.com · 02-01-2012, 04:46 PM

Quote:

Originally Posted by lscamaro

I got it figured out, thanks for the help AAC!!!

You are very welcome!

01-31-2012, 08:02 PM	#1
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	AAC Colorshift 2.0 Install HELP Ok so I bought a set of aac halos and cant seem to find a way to make them fit in the housings. They are for a non rs. Any tips? This is all I could do and am completely stumped right now :( Attached Images Last edited by lscamaro; 01-31-2012 at 10:23 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAC Halo Rings-Need a custom shop to install	xmattyx	USA - NY / NJ / PA	25	10-21-2011 11:57 AM
AAC Halo Install Help	Swytch	Cosmetics and Lighting Modification Discussions	17	07-11-2011 09:42 AM
Colorshift 2.0 installation PARTY!	LED Crazy	USA - Southcentral	0	07-01-2011 01:25 PM
Help with AAC dual halo install	The Stig	USA - Mid-Atlantic	13	01-30-2011 05:53 PM
AAC style colorshift halos	Winslow	Cosmetics and Lighting Modification Discussions	6	05-19-2010 06:34 PM

02-01-2012, 12:29 AM	#2
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Any suggestions? No one?

02-01-2012, 01:25 AM	#3
Chad's ZL1 THERAPY Drives: Red Rock Metallic ZL1 Join Date: Nov 2009 Location: Roseville Posts: 1,440 View My Garage	wait till morning. AAC will chime in.

02-01-2012, 10:14 AM	#4
Support@OracleLights.com Drives: www.CamaroLighting.com Join Date: May 2010 Location: New Orleans, LA Posts: 3,245	I will post a picture of how they are supposed to be mounted shortly.

02-01-2012, 10:28 AM	#5
Support@OracleLights.com Drives: www.CamaroLighting.com Join Date: May 2010 Location: New Orleans, LA Posts: 3,245	You are going to want to mount the ring "forward" onto the Non RS housing; not on the scatter-shield on the back of the light. You will want to use a few dots of silicone or two part epoxy to hold the ring in place. Back View: Back View: Front View:

02-01-2012, 11:26 AM	#6
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Thank you for the help, ill post back if I run into any other problems

02-01-2012, 04:35 PM	#7
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	I got it figured out, thanks for the help AAC!!!