2012 Dash Tronix Problem - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2012transform · 01-22-2012, 11:29 AM

I've had the dash tronix installed for about a week and was installed by my dealer. The V1 powers up perfectly and everything works fine. The dash tronix shows on the HUD at start and says dash tronix then it comes up and says V1 is Off or not connected. I was wondering if anyone has had this problem the V1 is working perfect other than not showing on the HUD. Thanks!

DashTronix · 01-22-2012, 11:53 PM

Your issue is likely caused by an incorrect or damaged cable from the Radar Projector to the V1.

Please verify that the cable used is a 4 conductor cable and not a two conductor cable.

When the V1 is On, is the display of the V1 dark or are the light of the V1 on?

Unplug the cable at the V1 and take and look at the plug. Are there 4 wires and 4 metal conductors on the plug?

Did you use a cable from the V1 kit or did you purchase a cable from somewhere else?

Please take a look at the cable and then give us a call at 773-888-3274 we can go over all the needed troubleshooting steps over the phone with you.

Thanks,

Team DashTronix

01-22-2012, 11:29 AM	#1
2012transform Drives: 2012 45TH 2LT V6 Join Date: Nov 2011 Location: Florida Posts: 24	2012 Dash Tronix Problem I've had the dash tronix installed for about a week and was installed by my dealer. The V1 powers up perfectly and everything works fine. The dash tronix shows on the HUD at start and says dash tronix then it comes up and says V1 is Off or not connected. I was wondering if anyone has had this problem the V1 is working perfect other than not showing on the HUD. Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2012 Hot Rod Power tour	IROCanSS	USA - Great Lakes	91	06-28-2012 12:47 PM
2012 LSX Challenge Series - 5th Gen Camaro Index-Style Bracket Racing	Sean@Phastek	Camaro Motorsports Discussions	0	12-14-2011 02:11 PM
OFFICAL 2012 LSX Challange series schedule from NMCA	nmcajefftaylor	Camaro Motorsports Discussions	5	12-11-2011 08:08 PM
GM Updates 2012 Silverado, Increased HD Capabilities	FenwickHockey65	General Automotive + Other Cars Discussion	14	09-03-2011 02:13 PM
P0300 Misfire Code Help	black-knight	4th Generation Camaros	4	02-08-2010 02:45 PM

01-22-2012, 11:53 PM	#2
DashTronix Drives: DashTronix Radar Projector Join Date: Sep 2010 Location: Display your V1 or 9500ci on your radio, DIC or HUD. Posts: 35	Your issue is likely caused by an incorrect or damaged cable from the Radar Projector to the V1. Please verify that the cable used is a 4 conductor cable and not a two conductor cable. When the V1 is On, is the display of the V1 dark or are the light of the V1 on? Unplug the cable at the V1 and take and look at the plug. Are there 4 wires and 4 metal conductors on the plug? Did you use a cable from the V1 kit or did you purchase a cable from somewhere else? Please take a look at the cable and then give us a call at 773-888-3274 we can go over all the needed troubleshooting steps over the phone with you. Thanks, Team DashTronix