You are browsing camaro5 
 |
|
07-06-2013, 10:51 AM
|
#1 |
 Drives: 2010 SSRS Join Date: Mar 2009
Location: Louisville, KY
Posts: 388
|
Need torque specs for street slayer
Installing a twin disk organic and carbon setup in the car and need the torque settings as I can't find the instructions :( Any help is greatly appreciated.
|
|
|
|
07-06-2013, 11:34 AM
|
#2 |
 
Drives: 2010 Camaro SS/RS Join Date: Sep 2008
Location: Denham Springs, LA
Posts: 705
|
I am looking for the same thing if anyone can help, torque specs for my Street Slayer Twin would be greatly appreciated. Need the flywheel and clutch specs. Pulled mine down to change the throw out bearing and inspect the clutch wear and trying to get it back on the road today!
|
|
|
|
|
07-06-2013, 07:29 PM
|
#3 |
 
|
Torque arp flywheel bolts to 80 ft/lbs and use a dab of red loc-tite.when factort bolts are used please refer to factory specs.
Torque allen head cover bolts with lock washers and flat washers to25-28 ft/lbs of torque apply a dap of blue loctite this is per instructions |
|
|
|
|
|
|
|
 |
|
|
