JRE rough idle blower cam - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jcollins91106 · 01-21-2012, 08:16 PM

I am getting ready to have a jre rough idle blower cam installed by Jannety racing. ( planning on fi in the future) I just want to see if anyone on here has it and how choppy it is. I looked on you tube but there's only one decent vid. If you have any vids please share, ive seen the numbers it pits down, just want to see how choppy it is really. Any feedback would be appreciated.

MileMAN402 · 01-21-2012, 08:53 PM

It was probably my video you saw...It has a decent amount of chop, it's about the most chop you'll get out of a good blower cam

jcollins91106 · 01-21-2012, 09:01 PM

Yea the vid on there is a black SS up in Waterbury, outside of Jannety racing I believe. I have dmh cutouts right behind my LT's so hopefully that will make it sound a little meaner.

MileMAN402 · 01-21-2012, 09:24 PM

Oh no that's not mine. Just search Jannetty 470 cam on YouTube. I'd link it but I'm on my phone.

jcollins91106 · 01-21-2012, 09:50 PM

I just watched it, it sounds good but if you search jre rough idle cam, the black camaro sounds incredibly lopey.... Just want to know what I'm getting. I'm not into racing, and for several grand I want to be able to hear a lopey idle.... It'll probably be 4-5 years before I can afford a blower, lol. That's a long time to have a cam that dosent make you 100% happy. Do you have any idea how this cam sounds compared to the other jre cams? If its not too much difference ill probably just go with it.

NYJETSFAN · 01-21-2012, 09:58 PM

I just got my car back yesterday from Jannetty Racing. They installed a maggie S/C, rough idle blower cam, roto fab cai, and a pedders pace car suspension and some other small mods. I tell you what, that cam chops ass big time..

NYJETSFAN · 01-21-2012, 10:00 PM

Too bad it snowed here in Maryland, so I am not able to put up any pics or vids just yet, but I will.

jcollins91106 · 01-21-2012, 10:03 PM

I'm in NYC and we have snow here too, post up vid when you get a chance. Or pm me, thanks for the input, and I hate you for getting the Maggie...jealous!

NYJETSFAN · 01-21-2012, 10:07 PM

Lol, I will pm you as soon as I put it up. I am originally from Far Rockaway Queens..

MileMAN402 · 01-21-2012, 10:45 PM

The chop will also depend on the idle. Mines set a little higher. This cam still doesn't have the chop of a big N/A cam. I wanted the chop at first but now that I'm getting a centri in the coming months idc anymore. I just want power lol.

It's a good cam either way.

jcollins91106 · 01-22-2012, 08:27 AM

I'm gonna go with it, I know down the road I will do fi and will regret it I I dont put a good blower can in now.

NYJETSFAN · 01-22-2012, 09:39 AM

Go for it. I am going to try and post a clip of mine today.

jcollins91106 · 01-22-2012, 11:19 AM

Awesome post it!!!! I just went to the gym and needless to say my SS dosent like 3" of ice too much, lol ...400hp ice skate!

gotroost · 01-22-2012, 12:03 PM

Not the greatest video, but here is one of mine about halfway down.

http://www.camaro5.com/forums/showth...maros&page=178

01-21-2012, 08:16 PM	#1
jcollins91106 Drives: 2010 2ss m6 Join Date: Aug 2011 Location: staten island, ny Posts: 511	JRE rough idle blower cam I am getting ready to have a jre rough idle blower cam installed by Jannety racing. ( planning on fi in the future) I just want to see if anyone on here has it and how choppy it is. I looked on you tube but there's only one decent vid. If you have any vids please share, ive seen the numbers it pits down, just want to see how choppy it is really. Any feedback would be appreciated. __________________ 2010 2ss M6, TSP 1 7/8 Long Tube headers,dual electric cutouts, 3" pipes all the way back to magnaflows. elite engineering catch can, custom painted engine cover,CAI cold air intake, apex cold air racescoop, jannety racing 470 hp kit, custom JRE hot rough idle blower cam, jannety racing dyno tuned. pfadt lowering springs, lsr short throw shifter, custom sub setup,sony 7" indash nav, interior stiching dye, 20% tint all around, HAVOC spoiler, tail light black out, chevy emblem black out, seibon BBII carbon fiber hood,Front and rear bowtie blackouts. 461 rwhp and not done yet!

01-21-2012, 08:53 PM	#2
MileMAN402 RIP JoePa Drives: 2010 2SS/RS & 2001 Audi S4 Join Date: Apr 2010 Location: Central PA Posts: 644 View My Garage	It was probably my video you saw...It has a decent amount of chop, it's about the most chop you'll get out of a good blower cam __________________

01-21-2012, 09:01 PM	#3
jcollins91106 Drives: 2010 2ss m6 Join Date: Aug 2011 Location: staten island, ny Posts: 511	Yea the vid on there is a black SS up in Waterbury, outside of Jannety racing I believe. I have dmh cutouts right behind my LT's so hopefully that will make it sound a little meaner. __________________ 2010 2ss M6, TSP 1 7/8 Long Tube headers,dual electric cutouts, 3" pipes all the way back to magnaflows. elite engineering catch can, custom painted engine cover,CAI cold air intake, apex cold air racescoop, jannety racing 470 hp kit, custom JRE hot rough idle blower cam, jannety racing dyno tuned. pfadt lowering springs, lsr short throw shifter, custom sub setup,sony 7" indash nav, interior stiching dye, 20% tint all around, HAVOC spoiler, tail light black out, chevy emblem black out, seibon BBII carbon fiber hood,Front and rear bowtie blackouts. 461 rwhp and not done yet!

01-21-2012, 09:24 PM	#4
MileMAN402 RIP JoePa Drives: 2010 2SS/RS & 2001 Audi S4 Join Date: Apr 2010 Location: Central PA Posts: 644 View My Garage	Oh no that's not mine. Just search Jannetty 470 cam on YouTube. I'd link it but I'm on my phone. __________________

01-21-2012, 09:50 PM	#5
jcollins91106 Drives: 2010 2ss m6 Join Date: Aug 2011 Location: staten island, ny Posts: 511	I just watched it, it sounds good but if you search jre rough idle cam, the black camaro sounds incredibly lopey.... Just want to know what I'm getting. I'm not into racing, and for several grand I want to be able to hear a lopey idle.... It'll probably be 4-5 years before I can afford a blower, lol. That's a long time to have a cam that dosent make you 100% happy. Do you have any idea how this cam sounds compared to the other jre cams? If its not too much difference ill probably just go with it. __________________ 2010 2ss M6, TSP 1 7/8 Long Tube headers,dual electric cutouts, 3" pipes all the way back to magnaflows. elite engineering catch can, custom painted engine cover,CAI cold air intake, apex cold air racescoop, jannety racing 470 hp kit, custom JRE hot rough idle blower cam, jannety racing dyno tuned. pfadt lowering springs, lsr short throw shifter, custom sub setup,sony 7" indash nav, interior stiching dye, 20% tint all around, HAVOC spoiler, tail light black out, chevy emblem black out, seibon BBII carbon fiber hood,Front and rear bowtie blackouts. 461 rwhp and not done yet!

01-21-2012, 09:58 PM	#6
NYJETSFAN El Hefe Drives: Black Camaro 2SS/RS Join Date: Jul 2010 Location: Maryland Posts: 1,067	I just got my car back yesterday from Jannetty Racing. They installed a maggie S/C, rough idle blower cam, roto fab cai, and a pedders pace car suspension and some other small mods. I tell you what, that cam chops ass big time..

01-21-2012, 10:00 PM	#7
NYJETSFAN El Hefe Drives: Black Camaro 2SS/RS Join Date: Jul 2010 Location: Maryland Posts: 1,067	Too bad it snowed here in Maryland, so I am not able to put up any pics or vids just yet, but I will.

01-21-2012, 10:03 PM	#8
jcollins91106 Drives: 2010 2ss m6 Join Date: Aug 2011 Location: staten island, ny Posts: 511	I'm in NYC and we have snow here too, post up vid when you get a chance. Or pm me, thanks for the input, and I hate you for getting the Maggie...jealous! __________________ 2010 2ss M6, TSP 1 7/8 Long Tube headers,dual electric cutouts, 3" pipes all the way back to magnaflows. elite engineering catch can, custom painted engine cover,CAI cold air intake, apex cold air racescoop, jannety racing 470 hp kit, custom JRE hot rough idle blower cam, jannety racing dyno tuned. pfadt lowering springs, lsr short throw shifter, custom sub setup,sony 7" indash nav, interior stiching dye, 20% tint all around, HAVOC spoiler, tail light black out, chevy emblem black out, seibon BBII carbon fiber hood,Front and rear bowtie blackouts. 461 rwhp and not done yet!

01-21-2012, 10:07 PM	#9
NYJETSFAN El Hefe Drives: Black Camaro 2SS/RS Join Date: Jul 2010 Location: Maryland Posts: 1,067	Lol, I will pm you as soon as I put it up. I am originally from Far Rockaway Queens..

01-21-2012, 10:45 PM	#10
MileMAN402 RIP JoePa Drives: 2010 2SS/RS & 2001 Audi S4 Join Date: Apr 2010 Location: Central PA Posts: 644 View My Garage	The chop will also depend on the idle. Mines set a little higher. This cam still doesn't have the chop of a big N/A cam. I wanted the chop at first but now that I'm getting a centri in the coming months idc anymore. I just want power lol. It's a good cam either way. __________________

01-22-2012, 08:27 AM	#11
jcollins91106 Drives: 2010 2ss m6 Join Date: Aug 2011 Location: staten island, ny Posts: 511	I'm gonna go with it, I know down the road I will do fi and will regret it I I dont put a good blower can in now. __________________ 2010 2ss M6, TSP 1 7/8 Long Tube headers,dual electric cutouts, 3" pipes all the way back to magnaflows. elite engineering catch can, custom painted engine cover,CAI cold air intake, apex cold air racescoop, jannety racing 470 hp kit, custom JRE hot rough idle blower cam, jannety racing dyno tuned. pfadt lowering springs, lsr short throw shifter, custom sub setup,sony 7" indash nav, interior stiching dye, 20% tint all around, HAVOC spoiler, tail light black out, chevy emblem black out, seibon BBII carbon fiber hood,Front and rear bowtie blackouts. 461 rwhp and not done yet!

01-22-2012, 09:39 AM	#12
NYJETSFAN El Hefe Drives: Black Camaro 2SS/RS Join Date: Jul 2010 Location: Maryland Posts: 1,067	Go for it. I am going to try and post a clip of mine today.

01-22-2012, 11:19 AM	#13
jcollins91106 Drives: 2010 2ss m6 Join Date: Aug 2011 Location: staten island, ny Posts: 511	Awesome post it!!!! I just went to the gym and needless to say my SS dosent like 3" of ice too much, lol ...400hp ice skate! __________________ 2010 2ss M6, TSP 1 7/8 Long Tube headers,dual electric cutouts, 3" pipes all the way back to magnaflows. elite engineering catch can, custom painted engine cover,CAI cold air intake, apex cold air racescoop, jannety racing 470 hp kit, custom JRE hot rough idle blower cam, jannety racing dyno tuned. pfadt lowering springs, lsr short throw shifter, custom sub setup,sony 7" indash nav, interior stiching dye, 20% tint all around, HAVOC spoiler, tail light black out, chevy emblem black out, seibon BBII carbon fiber hood,Front and rear bowtie blackouts. 461 rwhp and not done yet!

01-22-2012, 12:03 PM	#14
gotroost Drives: 2021 Crush ZL1 1LE Join Date: Oct 2009 Location: Sierra Vista, AZ Posts: 1,119 View My Garage	Not the greatest video, but here is one of mine about halfway down. http://www.camaro5.com/forums/showth...maros&page=178 __________________ 2021 Crush ZL1 1LE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cam basics	CamaroSpike23	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	76	11-25-2015 12:42 PM
SPI Blower Cam	Andrew@SPItuning	Forced Induction - V8	0	01-18-2012 11:49 AM
JRE cam, LT's, cai, and tune...hp estimate?	jcollins91106	5th Gen Camaro SS LS LT General Discussions	5	10-13-2011 10:35 PM
JRE 416 E-FORCE JRE CAM LT HEADERS PUMP GAS	JANNETTYRACING	Forced Induction - V8	15	06-04-2011 11:46 AM
JRE Street Cam installed	BOSS_HOSS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	5	04-28-2011 07:20 PM