RX catch can DIY - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

red_johnny · 09-15-2012, 10:43 AM

Ok, I am missing some stuff that was supposed to come with my catch can. Can someone tell me what I was supposed to get? I have the can, bracket, rubber caps, 1 bolt and hose. I think I am missing 2 more bolts that mount the can to the bracket and some freaking instructions.

Edit: Sorry, this is not a DIY. I meant to put "question: RX catch can DIY?"

kjkjr27 · 09-15-2012, 12:11 PM

Quote:

Originally Posted by red_johnny

Ok, I am missing some stuff that was supposed to come with my catch can. Can someone tell me what I was supposed to get? I have the can, bracket, rubber caps, 1 bolt and hose. I think I am missing 2 more bolts that mount the can to the bracket and some freaking instructions.

Edit: Sorry, this is not a DIY. I meant to put "question: RX catch can DIY?"

Not sure what the rubber caps are for unless you got the breather also. That is what I got with my catch can too. You aren't missing any bolts. You can adjust the height which is why there are three holes. Mine is connected with 1 bolt and holds strong. As far as instructions go just search catch can there are a bunch of them on here.

red_johnny · 09-15-2012, 12:32 PM

Quote:

Originally Posted by kjkjr27

Not sure what the rubber caps are for unless you got the breather also. That is what I got with my catch can too. You aren't missing any bolts. You can adjust the height which is why there are three holes. Mine is connected with 1 bolt and holds strong. As far as instructions go just search catch can there are a bunch of them on here.

Ok, the bolt I got does not fit into the catch can threaded holes. I did get a breather but still, no directions.

sycraft · 09-15-2012, 12:47 PM

The rubber cap is for the drivers side valve cover, remove the stock breather line and plug, also cap the intake, put in oil cap breather. The can can be mounted anywhere, but usually around the front of the motor off a emissions bolt. standard bolts hold bracket to can, may have paint in the threads, try cleaning the threads first.

before supercharger

red_johnny · 09-15-2012, 05:38 PM

Ok, the bolt does fit in. Just the paint was in the hole. All fixed and installed. Thanks for the help.

SC2150 · 09-15-2012, 07:09 PM

Thanks all! Yes, the bolts can be hard to start and the hose is in one length so you cut it to fit as needed.

09-15-2012, 10:43 AM	#1
red_johnny Drives: 2016 Gray 2SS M6 Join Date: Jun 2012 Location: Hermitage, PA Posts: 753 View My Garage	RX catch can DIY Ok, I am missing some stuff that was supposed to come with my catch can. Can someone tell me what I was supposed to get? I have the can, bracket, rubber caps, 1 bolt and hose. I think I am missing 2 more bolts that mount the can to the bracket and some freaking instructions. Edit: Sorry, this is not a DIY. I meant to put "question: RX catch can DIY?"

09-15-2012, 12:47 PM	#4
sycraft COTW 5/06/2013 Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012 Location: Milford, Michigan Posts: 3,201 View My Garage	The rubber cap is for the drivers side valve cover, remove the stock breather line and plug, also cap the intake, put in oil cap breather. The can can be mounted anywhere, but usually around the front of the motor off a emissions bolt. standard bolts hold bracket to can, may have paint in the threads, try cleaning the threads first. before supercharger __________________ 2017 Grand Sport, Borla X Pipe.....Enough Said

09-15-2012, 05:38 PM	#5
red_johnny Drives: 2016 Gray 2SS M6 Join Date: Jun 2012 Location: Hermitage, PA Posts: 753 View My Garage	Ok, the bolt does fit in. Just the paint was in the hole. All fixed and installed. Thanks for the help.

09-15-2012, 07:09 PM	#6
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Thanks all! Yes, the bolts can be hard to start and the hose is in one length so you cut it to fit as needed.