07-20-2016, 10:58 AM | #1 |
Banned
Join Date: Jan 2015
Posts: 1,089
|
BMR 1.25" rear kit installed.
I already have the poor mans lowering kit up front. (Extra weight of LSX block and blower) made for an awkward stance. So got the 1.25" rear springs from JDP put them in yesterday.
Actually was a pretty damned easy job. Except the fact you can't clock the bushings with 20x11 wheels. So alignment is off. 2.5hrs most of which was looking for sockets. Don't in the garage on Jack stands. So far the rear of the car is .75" lower. Should settle in a little more. Can already feel the difference of the car being flatter. FRONT before: REAR before |
07-20-2016, 11:10 AM | #2 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
Looking good!!
Kayla L. 801.545.4215 |
07-20-2016, 11:55 AM | #3 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
Looks Great! Is that a Wrap on your Camaro - too much reflection from Factory Paint?
|
07-20-2016, 12:14 PM | #4 |
Banned
Join Date: Jan 2015
Posts: 1,089
|
|
07-20-2016, 12:46 PM | #5 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
|
|
|
|
|