![]() |
|
|
#1 |
![]() Drives: 2011 denali hd2500 Join Date: Sep 2011
Location: clarkston, mi
Posts: 186
|
Lost reverse M6
Unbagged my car yesterday and went for a ride. Everything was fine until I got home. I did a burnout down my driveway (like I always do), and went to back up and the shifter would not go past 5th and 6th. The only way I could get reverse was to push real hard to get it. Any ideas? I checked fuses for related items. I couldn't find one that said reverse lock out.
|
|
|
|
|
|
#2 |
![]() Drives: 2012 ZL1 GLJ MG9 WBP RTQ Join Date: Nov 2011
Location: Texas
Posts: 77
|
Reverse Inhibit Description and Operation
The reverse inhibit solenoid is a safety feature which prevents an inadvertent shift into reverse at speeds above 5 km/h (3 mph). The system consist of the following components:
|
|
|
|
|
|
#3 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2013 ZL1 Join Date: Oct 2011
Location: tangent or
Posts: 2,985
|
It's the locout solenoid not getting voltage for sure. I am not sure which circuit powers it though. both the skip shift and the lockout soleniod look about he same down on the tranny.
make sure the connector is plugged in all the way.
__________________
2016 2SS
2020 super duty on 37's |
|
|
|
|
|
|
|
![]() |
|
|