Hooker active exhaust? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ashen L99 · 12-13-2023, 06:44 AM

Did anybody get one of these axel backs? Why is it discontinued and I’m only just now learning of its existence….?

https://www.holley.com/products/disc.../parts/BH13184

morepowerjoe · 12-13-2023, 06:53 PM

Idk but it seems like a killer set up.

PhantomBlack · 12-15-2023, 03:58 PM

I looked at this a few years ago. I checked Jegs and it looks like they may still have it available: https://www.jegs.com/i/Hooker-Header...673585_BANNER_

12-13-2023, 06:44 AM	#1
Ashen L99 Drives: Ashen grey, 1SS, L99 Join Date: Aug 2016 Location: Oklahoma Posts: 547	Hooker active exhaust? Did anybody get one of these axel backs? Why is it discontinued and I’m only just now learning of its existence….? https://www.holley.com/products/disc.../parts/BH13184 __________________ Roto-fab big gulp, Nick Williams 102mm TB, Kong X-port LSA, Ported 821 heads, BTR stage 4 V2 pd cam, 416 CI bottom end, original block. TSP 2” long tubes, Corsa ZL-1 catback. Nitrous Outlet 102mm plate kit/100 shot JUST IN CASE. NGK BR7EF plugs with Taylor plug wires. DSX flex fuel kit, DSX aux pump, zl1 in tank. deatchwork 1000cc injectors. B&M deep trans pan, stock 6L90 converter, ZL1 diff 3.23 ratio. GM ground effects, T-Rex upper grill, Z/28 Spoiler, Forgestar F14s, 12” subwoofer, and custom paint matched interior.

12-13-2023, 06:53 PM	#2
morepowerjoe Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020 Location: Austin, TX Posts: 2,232	Idk but it seems like a killer set up. __________________ DSS Pistons, Eagle ESP L19 Rods, ARP Head and Main Studs, TSP PRC CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Racing Lifters, CHE Trunnions, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP Longtubes, ZL1 Fuel Pump, Mishimoto Radiator and Oil Cooler, 3600 Circle D Converter, Tru Cool 40k Tranny Cooler, Fluid Dynamics Balancer, EBC 3GD Rotors with EBC Bluestuff NDX Pads, Bilstein B6 Shocks / Struts with Eibach ZL1 Drop Springs Build Thread https://www.camaro5.com/forums/showthread.php?t=609817

12-15-2023, 03:58 PM	#3
PhantomBlack Drives: 2014 Camaro 2SS Join Date: Oct 2017 Location: Brooksville, FL Posts: 197	I looked at this a few years ago. I checked Jegs and it looks like they may still have it available: https://www.jegs.com/i/Hooker-Header...673585_BANNER_ __________________ Mods: GPI SS1 VVT cam, TSP long tube headers, LSA conversion, ZL1 fuel pump, ADM FPCM, DW 700cc injectors, Lingenfelter solid isolator, Dedicated Motorsports ZL1 reinforced brick, ADM Griptech 2.5 pulley, JLT CAI, Phastek intake scoop,NPP cat-back, GM 3.91 gears, Eaton Truetrac, etc.