splash guards - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

hotrodzz4 · 06-27-2009, 10:45 PM

does anybody here know when the splash guard kit is going to be available with ABM? Im having no luck finding them.

Adam · 06-28-2009, 02:07 AM

are there any available at all?

PonyMan · 06-28-2009, 08:27 AM

Quote:

Originally Posted by Adam

are there any available at all?

Go to GMpartsdirect.com!!

Supermans · 06-28-2009, 08:28 AM

Where are you driving where you need the splash guards?

hotrodzz4 · 06-28-2009, 05:39 PM

going from experience with my silverado, everyday normal driving caused a "peppering" effect on the rocker panels, I want to add the splash guards to prevent this, edog has them on his IOM car but I cannot seem to find a part number for ABM

Adam · 06-29-2009, 01:05 AM

and it does rain, and getting dirty water splashed on the car sucks. Or mud, or salt, or ice, etc.

anyone know if these are a simple install?

Rodrunner · 06-29-2009, 02:33 PM

^^^They look to be. Think edog had his installed, but he may know more than most of us. I want some type of guard, but the ones GM is offering are just too short, meaning not elongated to look at least a bit like ground effects. Hoping aftermarkets come along soon, because hotrodzz4 is right, normal everyday driving will have the lower quarters chipped up in no time.

KJS · 06-29-2009, 06:48 PM

Not a problem installing them. Took about 45 min at most.
You turn the front wheels to install them, in order to do them the way I wanted I removed the rear wheels.

Adam · 06-29-2009, 07:20 PM

is it possible to do without removing rear wheels, what tools would I need?

SRFnSNO · 06-29-2009, 07:34 PM

I installed mine with the car on the ground.
and a battery drill & driver tip on Ratichet set
You realy only need to drill a hole on front wheels and you can turn them to do this.
To tap a hole (last screw) under Car in lower rocker (all 4 courners) used a scorpian tip cabinet screw to tap a hole then install proper screw. lower rockers are heavy plastic. tap hole with Driver in ratichet.

Also had flares Simonized at dealer befor pick up.

Longest thing was washing and Drying Car befor install.

Adam · 06-30-2009, 12:32 AM

crap I don't like drilling lol.

Firecapt10 · 06-30-2009, 11:35 AM

My dealer is trying to sell me the splash guards as well, can you post a pic to help me decide?

CamaroScotty · 06-30-2009, 12:02 PM

Contact dhiller@north2newman.com he mave have them IN STOCK and ready to ship!

SRFnSNO · 06-30-2009, 12:08 PM

look at this thread.
My car is on 2nd page.
http://www.camaro5.com/forums/showth...+guards&page=2

06-27-2009, 10:45 PM	#1
hotrodzz4 2G1FA1EV6A9116563 Drives: 95 s10 Join Date: Feb 2009 Location: richmond va Posts: 64	splash guards does anybody here know when the splash guard kit is going to be available with ABM? Im having no luck finding them. __________________ 1100 3/3 3000 4/28 3400 5/30 3800 4000 4200 6/10? delivered 6/24/09 ABM 1LS auto

06-28-2009, 08:28 AM	#4
Supermans Camaro & Stang Enthusiast Drives: 2011 Mustang 5.0 in Kona Blue Join Date: Mar 2008 Location: Miami Posts: 4,729 View My Garage	Where are you driving where you need the splash guards? __________________ Bought my Camaro from Eric Hall(817) 421-7266

06-28-2009, 05:39 PM	#5
hotrodzz4 2G1FA1EV6A9116563 Drives: 95 s10 Join Date: Feb 2009 Location: richmond va Posts: 64	going from experience with my silverado, everyday normal driving caused a "peppering" effect on the rocker panels, I want to add the splash guards to prevent this, edog has them on his IOM car but I cannot seem to find a part number for ABM __________________ 1100 3/3 3000 4/28 3400 5/30 3800 4000 4200 6/10? delivered 6/24/09 ABM 1LS auto

06-29-2009, 02:33 PM	#7
Rodrunner Senior Member Drives: 2010 SS/RS, '06 350Z Join Date: Oct 2008 Location: So. Maryland Posts: 2,326	^^^They look to be. Think edog had his installed, but he may know more than most of us. I want some type of guard, but the ones GM is offering are just too short, meaning not elongated to look at least a bit like ground effects. Hoping aftermarkets come along soon, because hotrodzz4 is right, normal everyday driving will have the lower quarters chipped up in no time. __________________ 2SS/RS - Black/Black - CGM Rally Stripes - Auto - VIN 10171

06-29-2009, 06:48 PM	#8
KJS Drives: '10 RJT,'95&'14 Vette Join Date: Feb 2009 Location: Cut Throat, NY Posts: 1,722 View My Garage	Installed 'em.... Not a problem installing them. Took about 45 min at most. You turn the front wheels to install them, in order to do them the way I wanted I removed the rear wheels. __________________ *"As ye sow, so shall ye reap" - Me* Mine at sunset

06-28-2009, 02:07 AM	#2
Adam You Said Member Drives: 2010 SIM 2LT Auto RS Join Date: Feb 2009 Location: Why is this required? Posts: 326	are there any available at all?

06-29-2009, 01:05 AM	#6
Adam You Said Member Drives: 2010 SIM 2LT Auto RS Join Date: Feb 2009 Location: Why is this required? Posts: 326	and it does rain, and getting dirty water splashed on the car sucks. Or mud, or salt, or ice, etc. anyone know if these are a simple install?

06-29-2009, 07:20 PM	#9
Adam You Said Member Drives: 2010 SIM 2LT Auto RS Join Date: Feb 2009 Location: Why is this required? Posts: 326	is it possible to do without removing rear wheels, what tools would I need?

06-29-2009, 07:34 PM	#10
SRFnSNO Drives: Blown & Flamed Join Date: Feb 2009 Location: Jerzy Posts: 654 View My Garage	I installed mine with the car on the ground. and a battery drill & driver tip on Ratichet set You realy only need to drill a hole on front wheels and you can turn them to do this. To tap a hole (last screw) under Car in lower rocker (all 4 courners) used a scorpian tip cabinet screw to tap a hole then install proper screw. lower rockers are heavy plastic. tap hole with Driver in ratichet. Also had flares Simonized at dealer befor pick up. Longest thing was washing and Drying Car befor install.

06-30-2009, 12:32 AM	#11
Adam You Said Member Drives: 2010 SIM 2LT Auto RS Join Date: Feb 2009 Location: Why is this required? Posts: 326	crap I don't like drilling lol.

06-30-2009, 11:35 AM	#12
Firecapt10 6254D That's me Drives: Soon: 6254D Join Date: Jan 2009 Location: Washington State Posts: 30	My dealer is trying to sell me the splash guards as well, can you post a pic to help me decide? __________________ 1100, Preliminary order accepted 1/9/09 6000, Delivered to the customer 8/26/09 ........................

06-30-2009, 12:02 PM	#13
CamaroScotty Account Suspended Drives: Your new SLP Camaro! Join Date: Jul 2008 Location: Cedarburg, WI Posts: 6,790	Contact dhiller@north2newman.com he mave have them IN STOCK and ready to ship!

06-30-2009, 12:08 PM	#14
SRFnSNO Drives: Blown & Flamed Join Date: Feb 2009 Location: Jerzy Posts: 654 View My Garage	look at this thread. My car is on 2nd page. http://www.camaro5.com/forums/showth...+guards&page=2

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Molded Splash Guards	Jimmy	Cosmetics and Lighting Modification Discussions	164	06-09-2013 06:16 PM
Splash guards badge removal	destroyer4	5th Gen Camaro SS LS LT General Discussions	22	05-11-2009 08:22 AM
2010 Camaro splash guards fit with ground effects?	Supercop29	Cosmetics and Lighting Modification Discussions	4	05-05-2009 04:39 PM
Contoured Splash Guards?	blazzin1	Cosmetics and Lighting Modification Discussions	13	01-14-2009 06:37 AM