blower cam sizing? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ace32x · 12-21-2012, 12:09 PM

looking into a solid cam set up for this spring when i tear into the zl1. Looking for feedback from people that have done the cam swap already. was looking at the lingenfelter gt9 cam but it doesn't seem aggressive as i would like to go. what cam size did you go and would you do it again?

Lethal Racing · 12-23-2012, 03:49 AM

Ace,

We have been using a cam with around 2 degrees overlap that works great with Hesse motors. Just made 650rwhp on the dyno with No Headers!!! Car drives Flawless. 22x/23x 116lsa.

Shawn

ace32x · 12-23-2012, 08:46 PM

Quote:

Originally Posted by Lethal Racing

Ace,

We have been using a cam with around 2 degrees overlap that works great with Hesse motors. Just made 650rwhp on the dyno with No Headers!!! Car drives Flawless. 22x/23x 116lsa.

Shawn

solid numbers, what other mods were on the car? i would like to see low 7xx whp with a 102 TB long tubes ported snout and the cam and 9.1 lower and 2.5 upper

dmax86 · 06-19-2013, 09:28 PM

Just did the BTR stage 3 cam. Same cam redline used.

12-21-2012, 12:09 PM	#1
ace32x Drives: 2013 ZL1 Join Date: Oct 2012 Location: puyallup Posts: 543	blower cam sizing? looking into a solid cam set up for this spring when i tear into the zl1. Looking for feedback from people that have done the cam swap already. was looking at the lingenfelter gt9 cam but it doesn't seem aggressive as i would like to go. what cam size did you go and would you do it again? __________________ C6Z06 400ci, twin gen 2 promod 88's,th400, Alky car

12-23-2012, 03:49 AM	#2
Lethal Racing Drives: LSx Performance Specialist Join Date: Jul 2011 Location: Lafayette, LA Posts: 517	Ace, We have been using a cam with around 2 degrees overlap that works great with Hesse motors. Just made 650rwhp on the dyno with No Headers!!! Car drives Flawless. 22x/23x 116lsa. Shawn