How can i remove the side mirror glass? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

imponte · 09-21-2019, 04:04 AM

Hi guys. How can i remove the glass? Can i just pull the glass out? Or there is something else?

fhrex · 09-23-2019, 05:27 AM

1

Outside Rearview Mirror Glass Retainers (Qty :6)

Warning: Refer to Glass and Sheet Metal Handling Warning.

Procedure
Apply several layers of masking tape to the top of the outside rearview mirror housing in order to protect the painted finish.
Push the mirror glass (2) inward at the bottom of the mirror glass until full travel is reached.

Insert a suitable tool behind the mirror glass and housing, pry outward until the mirror glass is releases from the retainers.
Disconnect electrical connectors from mirror, if equipped.
2

Outside Rearview Mirror Glass

Procedure
Align the mirror glass retainers with the retaining tabs (1) on the actuator.
Using a 9 cm (3 in) rubber sanding block placed in the center of the mirror glass, apply pressure until an audible click is heard.
Inspect the power mirror for proper operation.

frankwjr · 09-23-2019, 08:43 AM

Quote:

Originally Posted by fhrex

1

Outside Rearview Mirror Glass Retainers (Qty :6)

Warning: Refer to Glass and Sheet Metal Handling Warning.

Procedure
Apply several layers of masking tape to the top of the outside rearview mirror housing in order to protect the painted finish.
Push the mirror glass (2) inward at the bottom of the mirror glass until full travel is reached.

Insert a suitable tool behind the mirror glass and housing, pry outward until the mirror glass is releases from the retainers.
Disconnect electrical connectors from mirror, if equipped.
2

Outside Rearview Mirror Glass

Procedure
Align the mirror glass retainers with the retaining tabs (1) on the actuator.
Using a 9 cm (3 in) rubber sanding block placed in the center of the mirror glass, apply pressure until an audible click is heard.
Inspect the power mirror for proper operation.

Tks bro.....happened to be lookin fer dis info too!

l8tr

PEACE

imponte · 09-30-2019, 08:01 AM

Quote:

Originally Posted by fhrex

1

Outside Rearview Mirror Glass Retainers (Qty :6)

Warning: Refer to Glass and Sheet Metal Handling Warning.

Procedure
Apply several layers of masking tape to the top of the outside rearview mirror housing in order to protect the painted finish.
Push the mirror glass (2) inward at the bottom of the mirror glass until full travel is reached.
Insert a suitable tool behind the mirror glass and housing, pry outward until the mirror glass is releases from the retainers.
Disconnect electrical connectors from mirror, if equipped.
2

Outside Rearview Mirror Glass

Procedure
Align the mirror glass retainers with the retaining tabs (1) on the actuator.
Using a 9 cm (3 in) rubber sanding block placed in the center of the mirror glass, apply pressure until an audible click is heard.
Inspect the power mirror for proper operation.

Thanks. This is helpful

09-21-2019, 04:04 AM	#1
imponte Drives: '10 Camaro SS Join Date: May 2019 Location: Turkey Posts: 62	How can i remove the side mirror glass? Hi guys. How can i remove the glass? Can i just pull the glass out? Or there is something else?

09-23-2019, 05:27 AM	#2
fhrex Drives: 2011 Camaro 2LT/RS Join Date: May 2015 Location: Farmville, Virginia Posts: 1,030 View My Garage	1 Outside Rearview Mirror Glass Retainers (Qty :6) Warning: Refer to Glass and Sheet Metal Handling Warning. Procedure Apply several layers of masking tape to the top of the outside rearview mirror housing in order to protect the painted finish. Push the mirror glass (2) inward at the bottom of the mirror glass until full travel is reached. Insert a suitable tool behind the mirror glass and housing, pry outward until the mirror glass is releases from the retainers. Disconnect electrical connectors from mirror, if equipped. 2 Outside Rearview Mirror Glass Procedure Align the mirror glass retainers with the retaining tabs (1) on the actuator. Using a 9 cm (3 in) rubber sanding block placed in the center of the mirror glass, apply pressure until an audible click is heard. Inspect the power mirror for proper operation.