Looks like Christmas morning - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ZL1 Brian · 04-07-2014, 09:32 PM

Thanks with the help of Jannetty Racing I put together a great performance package. Package includes:

1). ATI Super Damper
2). Lingenfelter 10% drive pulley
3). Harmonic balancer
4). Dynatech long tube headers w/ ceramic coating
5). VMax throttle body
6). ID 850 injectors
7). Apex catch can w/ black braided hoses
8). Hurst line lock
9). Sct tuner

Other notables are a curb alert so that I don't damage carbon fiber front air dam and all ground affects that are waiting to be dipped. Also got the skip ship eliminator for those annoying 1st to 4th gear shifts.

Current mods are a Rotofab cold air and big gulp. Plus a pair of MT drag radials.

Now I'm just looking for a roll bar that I can easily switch in and out of the car. RPM makes a nice bar but I don't want to cut any plastic in the back seat and want minimal evidence of a roll bar to remain when taken out. Plus it's a 4 hr install/ uninstall. I might have to do something custom but I don't have a lot of time before race season. With these mods I will run ( or should run) much faster than an 11:50 and will get kicked off the track. Plus I run a car club challenge which will be impossible to keep under this time. Any ideas or suggestions with this would be great.

Next mod will be an RX Super Chiller!

Stephen12ZL1 · 04-07-2014, 10:01 PM

11.50 won't get you kicked out of most tracks. New ruling is 10.0@135 on 2008 & up cars. Only point is the definition of "unmodified". Some track say the "unmodified" applies to the firewall and body whereas other tracks say anything other than bone stock is modified.

Stephen12ZL1 · 04-07-2014, 10:02 PM

oh...you don't need ID850s for a 10% overdrive but they will be able to grow with any new mods. Why 10%? Your pulley is labeled 9.17" which is 18%.

ZL1-PA · 04-07-2014, 10:16 PM

Let us know how you like the curb alert.
Some sort of camera would be really cool too.

ZL1 Brian · 04-07-2014, 11:20 PM

Quote:

Originally Posted by Stephen12ZL1

oh...you don't need ID850s for a 10% overdrive but they will be able to grow with any new mods. Why 10%? Your pulley is labeled 9.17" which is 18%.

Oops. Sorry. Yes it's an 18% pulley.

Emvici · 04-08-2014, 11:25 AM

ZL1Brian, certainly does look like Christmas came early

. fyi I am having my superchiller installed hopefully sometime this week!. I will let you know how it goes. I know there is words between tracy and david both whom have worked together on the chiller system. I cannot say who is right or wrong, I can only say I spoke with both of them, and that I am purchasing my system from David.

Lethal Z · 04-08-2014, 11:43 AM

You need to find a Dyno tune instead of that canned tune. Nobody in your area?

ricky_ZL1 · 04-08-2014, 11:44 AM

Very Nice, the headers and Pulley were a huge gain after install. I completed on Saturday. The pulley was a little tricky but it all worked out.

EvilZL1 · 04-08-2014, 07:48 PM

Must be nice, Christmas cant come early enough. Where did you get the dynatech headers? Any local shops, Dynospeed?

Sent from my iPad using Tapatalk

2014CamaroZL1 · 04-09-2014, 10:56 AM

Please post lots of pix of the dipped ground effects.
Presumably carbon fiber ?
I am itchin' to do something with mine, but don't yet know what.

04-07-2014, 09:32 PM	#1
ZL1 Brian Drives: 2012 Camaro ZL1 Join Date: Jun 2012 Location: Tacoma Posts: 83 View My Garage	Looks like Christmas morning Thanks with the help of Jannetty Racing I put together a great performance package. Package includes: 1). ATI Super Damper 2). Lingenfelter 10% drive pulley 3). Harmonic balancer 4). Dynatech long tube headers w/ ceramic coating 5). VMax throttle body 6). ID 850 injectors 7). Apex catch can w/ black braided hoses 8). Hurst line lock 9). Sct tuner Other notables are a curb alert so that I don't damage carbon fiber front air dam and all ground affects that are waiting to be dipped. Also got the skip ship eliminator for those annoying 1st to 4th gear shifts. Current mods are a Rotofab cold air and big gulp. Plus a pair of MT drag radials. Now I'm just looking for a roll bar that I can easily switch in and out of the car. RPM makes a nice bar but I don't want to cut any plastic in the back seat and want minimal evidence of a roll bar to remain when taken out. Plus it's a 4 hr install/ uninstall. I might have to do something custom but I don't have a lot of time before race season. With these mods I will run ( or should run) much faster than an 11:50 and will get kicked off the track. Plus I run a car club challenge which will be impossible to keep under this time. Any ideas or suggestions with this would be great. Next mod will be an RX Super Chiller! Attached Images

04-07-2014, 10:01 PM	#2
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,824	11.50 won't get you kicked out of most tracks. New ruling is 10.0@135 on 2008 & up cars. Only point is the definition of "unmodified". Some track say the "unmodified" applies to the firewall and body whereas other tracks say anything other than bone stock is modified. __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

04-07-2014, 10:02 PM	#3
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,824	oh...you don't need ID850s for a 10% overdrive but they will be able to grow with any new mods. Why 10%? Your pulley is labeled 9.17" which is 18%. __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

04-07-2014, 10:16 PM	#4
ZL1-PA Drives: 2014 ZL1 Join Date: Dec 2013 Location: PA Posts: 151	Curb alert Let us know how you like the curb alert. Some sort of camera would be really cool too.

04-08-2014, 07:48 PM	#9
EvilZL1 Snake Eater Drives: 2012 AGM ZL1 Join Date: Oct 2011 Location: TN Posts: 2,737	Must be nice, Christmas cant come early enough. Where did you get the dynatech headers? Any local shops, Dynospeed? Sent from my iPad using Tapatalk __________________ Build Thread: http://www.camaro5.com/forums/showth...95#post8351295 Make sure you don’t forget to subscribe to my channel! More content on the way. Like, share with your friends https://www.youtube.com/channel/UC9Z...sP2wjsLLFeP1zQ Follow me on instagram: http://www.instagram.com/snkeatr/

04-08-2014, 11:25 AM	#6
Emvici Drives: 2014 ZL1 White Convertible Join Date: Aug 2013 Location: St Pete Fl Posts: 682	ZL1Brian, certainly does look like Christmas came early . fyi I am having my superchiller installed hopefully sometime this week!. I will let you know how it goes. I know there is words between tracy and david both whom have worked together on the chiller system. I cannot say who is right or wrong, I can only say I spoke with both of them, and that I am purchasing my system from David.

04-08-2014, 11:43 AM	#7
Lethal Z American Gearhead!! Drives: ZL1 1LE/GT350/Ford RS/Gen 2 Raptor Join Date: Mar 2013 Location: Merica Posts: 433	You need to find a Dyno tune instead of that canned tune. Nobody in your area?

04-08-2014, 11:44 AM	#8
ricky_ZL1 Drives: 2013 ZL1 Camaro Join Date: Jan 2014 Location: Mexia Tx Posts: 89	Very Nice, the headers and Pulley were a huge gain after install. I completed on Saturday. The pulley was a little tricky but it all worked out.

04-09-2014, 10:56 AM	#10
2014CamaroZL1 Drives: 2014 CRT ZL1 Join Date: Jun 2013 Location: Central NJ Posts: 712	Please post lots of pix of the dipped ground effects. Presumably carbon fiber ? I am itchin' to do something with mine, but don't yet know what.