Non RS to RS headlights install issue - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ChevyCam13 · 11-05-2014, 12:13 AM

Cant get the headlights to turn on after installing them. I have replaced the Ballast on both lights I have replaced the harness I have made sure all plugs are plugged in correctly I can't get these lights to turn on and I don't know what to do next

any help would be appreciated maybe I missed something.

Thanks guys

TommyTheCat · 11-05-2014, 10:45 PM

you didn't test the lights before tearing off the fascia? make sure harness is plugged in correctly. turn signals or halos working? which harness are you using, where did you get the lights?

ChevyCam13 · 11-06-2014, 12:02 AM

Ok was messin with it today Looks like the connectors that go from harness to lights are not working well I Wiggled the cable and it turned on the lights but as soon as I let go of it they turn back off. Might have to push the wires into the connectors they might be loose. I got the harness and lights from gen5dyi.

11-05-2014, 12:13 AM	#1
ChevyCam13 Drives: 2013 Chevy Camaro 1SS LS3 Join Date: Oct 2012 Location: Burbank, CA Posts: 251	Non RS to RS headlights install issue Cant get the headlights to turn on after installing them. I have replaced the Ballast on both lights I have replaced the harness I have made sure all plugs are plugged in correctly I can't get these lights to turn on and I don't know what to do next any help would be appreciated maybe I missed something. Thanks guys

11-05-2014, 10:45 PM	#2
TommyTheCat SHKE BKE Drives: 2013 Camaro Join Date: May 2014 Location: SoCal Posts: 3,105	you didn't test the lights before tearing off the fascia? make sure harness is plugged in correctly. turn signals or halos working? which harness are you using, where did you get the lights?

11-06-2014, 12:02 AM	#3
ChevyCam13 Drives: 2013 Chevy Camaro 1SS LS3 Join Date: Oct 2012 Location: Burbank, CA Posts: 251	Ok was messin with it today Looks like the connectors that go from harness to lights are not working well I Wiggled the cable and it turned on the lights but as soon as I let go of it they turn back off. Might have to push the wires into the connectors they might be loose. I got the harness and lights from gen5dyi.