LS3 cam, springs etc, single bolt cam gear, and Meling oil pump FS - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

was619 · 10-22-2013, 02:34 AM

Did a cam swap selling the parts I swapped.
Almost 43k miles on the car.
Everything is located in north Alabama.

Stock cam $120

Springs, seats, retainers etc $35

I also have the stock pushrods as well if anyone is interested

Meling oil pump- SOLD I bought it off a member a while back. Comes with new seals. It was installed for test fitting only and has some scratches on it from a double roller chain.

LS2 timing chain and
Ls2 dampener both are still in original packaging
$65 shipped

Shipping will be extra depending on where it has to go to, unless otherwise stated.

All items Obo. Message me or post below if interested

was619 · 10-23-2013, 03:46 PM

Bump it up

was619 · 10-30-2013, 11:48 PM

Bump

The swap is done. I'll post pictures by the end of the week

ROVEGA254 · 10-31-2013, 12:04 PM

PM sent

ROVEGA254 · 11-02-2013, 10:10 AM

Never mind. I found a cam already. Thanks

was619 · 11-28-2013, 10:47 PM

Bump

bct10985 · 11-29-2013, 09:24 AM

Which melling pump is this. The 10296?

was619 · 12-01-2013, 02:40 AM

Quote:

Originally Posted by bct10985

Which melling pump is this. The 10296?

I'm not sure exactly. The info should be easy to find else where. Last time I looked it up the numbers showed that this model flows much more fluid than a stock or ported unit

rocket69GTP · 12-03-2013, 03:48 PM

Does it come with one or two springs?

was619 · 12-05-2013, 06:49 PM

Quote:

Originally Posted by rocket69GTP

Does it come with one or two springs?

The stock springs are single springs not double if that's what you mean. Otherwise it would come with 16 of them

was619 · 12-07-2013, 03:13 AM

Saturday bump

was619 · 12-08-2013, 05:43 PM

Bump it up

Threlkeld's SS · 01-09-2014, 01:35 AM

Do you still have the oil pump?

was619 · 01-09-2014, 06:20 PM

Quote:

Originally Posted by Threlkeld's SS

Do you still have the oil pump?

Still available!

10-22-2013, 02:34 AM	#1
was619 Billy The Kid Drives: Cyber Grey 2SS/RS Join Date: Jun 2009 Location: North Alabama Posts: 637	LS3 cam, springs etc, single bolt cam gear, and Meling oil pump FS Did a cam swap selling the parts I swapped. Almost 43k miles on the car. Everything is located in north Alabama. Stock cam $120 Springs, seats, retainers etc $35 I also have the stock pushrods as well if anyone is interested Meling oil pump- SOLD I bought it off a member a while back. Comes with new seals. It was installed for test fitting only and has some scratches on it from a double roller chain. LS2 timing chain and Ls2 dampener both are still in original packaging $65 shipped Shipping will be extra depending on where it has to go to, unless otherwise stated. All items Obo. Message me or post below if interested __________________ CGM 2SS/RS[SIZE="1"] Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels Last edited by was619; 02-03-2015 at 04:14 PM.

10-23-2013, 03:46 PM	#2
was619 Billy The Kid Drives: Cyber Grey 2SS/RS Join Date: Jun 2009 Location: North Alabama Posts: 637	Bump it up __________________ CGM 2SS/RS[SIZE="1"] Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels

10-30-2013, 11:48 PM	#3
was619 Billy The Kid Drives: Cyber Grey 2SS/RS Join Date: Jun 2009 Location: North Alabama Posts: 637	Bump The swap is done. I'll post pictures by the end of the week __________________ CGM 2SS/RS[SIZE="1"] Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels

11-28-2013, 10:47 PM	#6
was619 Billy The Kid Drives: Cyber Grey 2SS/RS Join Date: Jun 2009 Location: North Alabama Posts: 637	Bump __________________ CGM 2SS/RS[SIZE="1"] Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels

11-29-2013, 09:24 AM	#7
bct10985 Drives: 2010 2SS LS3, 2013 duramax Join Date: Nov 2012 Location: Dover, De Posts: 1,452	Which melling pump is this. The 10296? __________________ ECS Ysi-B, cam, Tsp 2" longtubes, Squash dual pumps, Id1300s, meth, 4L80e, FTI 3600, ZL1 3.73 diff, BMR suspension, 15" conversion, weld rts mt 275 et street R. 9.6@147mph

10-31-2013, 12:04 PM	#4
ROVEGA254 Drives: 2008 Silverado z71 Join Date: Oct 2013 Location: Waco TX Posts: 2	PM sent

11-02-2013, 10:10 AM	#5
ROVEGA254 Drives: 2008 Silverado z71 Join Date: Oct 2013 Location: Waco TX Posts: 2	Never mind. I found a cam already. Thanks

12-03-2013, 03:48 PM	#9
rocket69GTP Drives: G8 Join Date: Jan 2012 Location: Pensacola, FL Posts: 22	Does it come with one or two springs?

12-07-2013, 03:13 AM	#11
was619 Billy The Kid Drives: Cyber Grey 2SS/RS Join Date: Jun 2009 Location: North Alabama Posts: 637	Saturday bump __________________ CGM 2SS/RS[SIZE="1"] Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels

12-08-2013, 05:43 PM	#12
was619 Billy The Kid Drives: Cyber Grey 2SS/RS Join Date: Jun 2009 Location: North Alabama Posts: 637	Bump it up __________________ CGM 2SS/RS[SIZE="1"] Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels

01-09-2014, 01:35 AM	#13
Threlkeld's SS Drives: 2010 camaro ss Join Date: Mar 2013 Location: ft lewis,wa Posts: 284	Do you still have the oil pump?