Catch Can - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

gatortuba · 01-23-2015, 06:20 PM

Will this work with my 2010 V6?

http://www.pepboys.com/product/details/154992/00127

camaro1350 · 01-23-2015, 06:36 PM

It should work but don't know the reputation of that company. If I was you I go with RX or apex both are proven to work very well. I have the RX and trust me, you need one.

PalmerGA · 01-23-2015, 06:38 PM

Probably, but did you enter your vehicle information just to make sure?

hzisfrom1994 · 01-23-2015, 07:05 PM

Just buy Elite's catch can, which is directly manufactured for the V6 Camaro. You get what you pay for, besides it is only 34$ more. I have it and it is fabulous!! Why not spend more money and buy something that you know for sure it will work for the car, isnt it? Buy something that it is reputable and directly manufacture for the car.

Good luck anyway, it is your money and your car, you are the one who ultimately make the decision.

Ace0751 · 01-23-2015, 07:08 PM

Quote:

Originally Posted by camaro1350

It should work but don't know the reputation of that company. If I was you I go with RX or apex both are proven to work very well. I have the RX and trust me, you need one.

^^^^^^ this big time.

pickwithaustin · 01-23-2015, 07:14 PM

Why not just buy one off of one of the recognized sponsor vendors off this site? Roughly the same prices and proven good. I use an Apex myself on my V8, and I love it (they make for V6 also). Other's here are good as well, I'm sure (Elite, etc.).

NYCamOwner · 01-23-2015, 08:00 PM

Like everyone else says, for just a little bit more, you get a proven item. I have an Elite Catch Can, and here is the results after just 4500 miles.

gutterball · 01-24-2015, 11:01 AM

I had one similar to that. it was just a hollow chamber, which is not what you want. get the Elite or MightyMouse

speedygonzales · 01-24-2015, 06:30 PM

Based on this page: http://www.mishimoto.com/mishimoto-c...Kz2BoCTBDw_wcB
It does not appear that can has baffles. Since the others are called baffled and that one does not say baffled.

#10 post here confirms it: http://forums.nasioc.com/forums/show....php?t=2297970

I think we had an RX on our LFX and liked it cause it had a petcock on the bottom of it. The Elite it seems, you have to unscrew the bottom can to dump them now. Probably not a draw back.

Here's some information about the expensive baffled Mishimoto: http://lib.store.yahoo.net/lib/yhst-...ringReport.pdf

Notice it has a 40 micron filter built into it. But at $325, screw that

I'd look at the other baffled Mishimoto. http://www.mishimoto.com/compact-baf...uctdescription

I thought it was unique cause it had a 50 Micron filter

Didn't see any of that in the Elite
https://store-581ad.mybigcommerce.co...can-model3.jpg

I think if I got another, it would be a baffled Mishimoto. But not the expensive one.

01-23-2015, 06:36 PM	#2
camaro1350 Drives: 2013 Camaro RS 1LT, 6M Join Date: Jan 2013 Location: Albany, OR Posts: 603	It should work but don't know the reputation of that company. If I was you I go with RX or apex both are proven to work very well. I have the RX and trust me, you need one. __________________

01-23-2015, 06:38 PM	#3
PalmerGA Drives: 2013 SIM 1SS/RS L99 Join Date: May 2012 Location: Southwest GA Posts: 8,754 View My Garage	Probably, but did you enter your vehicle information just to make sure? __________________ 2013 1SS/RS Coupe L99, Stainless Power Works LT Headers, SCT X4 Custom Tune from RDP, CAI Inc. Air Intake w/ Apex Scoop, VMAX CNC Ported Throttle Body, Solo Axle-Back Exhaust w/ J-pipes, Apex Catch Can, Husky Splash Guards, Heritage Grille, 3D Carbon Rear Spoiler, Oracle Chrome Turn Signal Bulbs, GM Reverse Light Trim Billets, Gorilla Black Locking Lugs, Emblem Pros Retro SS Badges/Custom Retro SS Kickplates/Under-hood Bowtie, 35% window Tint, Nitto Motivo Tires (6-8-18)

01-23-2015, 07:14 PM	#6
pickwithaustin Drives: 2011 Camaro 2SS/RS Convertible and: Join Date: May 2014 Location: Central Texas Posts: 1,863	Why not just buy one off of one of the recognized sponsor vendors off this site? Roughly the same prices and proven good. I use an Apex myself on my V8, and I love it (they make for V6 also). Other's here are good as well, I'm sure (Elite, etc.). __________________ --------------------------- Currently in my Garage: 2011 Camaro 2SS/RS Convertible \| 1980 Corvette Stingray \| 1981 Firebird \| 1968 El Camino \| 2007 Crown Vic Police Interceptor \| 2001 Silverado \| 2001 Blazer \| 1965 Chevy C-10 \| 2007 Harley Softail Custom \| 2013 MX-5 in Copper Red Mica \| 2000 Corvette Convertible \| 2010 Corvette Grand Sport \| 2006 Audi A3 Turbo \| 2008 BMW 328i

01-23-2015, 08:00 PM	#7
NYCamOwner "Katy" Drives: 2014 2LT A6 'Vert Join Date: Feb 2014 Location: Western New York Posts: 1,076 View My Garage	Like everyone else says, for just a little bit more, you get a proven item. I have an Elite Catch Can, and here is the results after just 4500 miles. Attached Images __________________ 2014 Black 2LT Convertible Elite Engineering Catch Can, Vitesse Throttle Controller, CAI Cold Air Intake Possible next mods: Throttle Body Exhaust Upstate C5 Member No, that is not me in the avatar..... I just love hot girls and hot cars.... or hot girls IN hot cars....

01-24-2015, 06:30 PM	#9
speedygonzales Drives: 99 z71, 2012 2SS Join Date: Sep 2012 Location: Smithfield, VA Posts: 205 View My Garage	Little investigation goes a long way Based on this page: http://www.mishimoto.com/mishimoto-c...Kz2BoCTBDw_wcB It does not appear that can has baffles. Since the others are called baffled and that one does not say baffled. #10 post here confirms it: http://forums.nasioc.com/forums/show....php?t=2297970 I think we had an RX on our LFX and liked it cause it had a petcock on the bottom of it. The Elite it seems, you have to unscrew the bottom can to dump them now. Probably not a draw back. Here's some information about the expensive baffled Mishimoto: http://lib.store.yahoo.net/lib/yhst-...ringReport.pdf Notice it has a 40 micron filter built into it. But at $325, screw that I'd look at the other baffled Mishimoto. http://www.mishimoto.com/compact-baf...uctdescription I thought it was unique cause it had a 50 Micron filter Didn't see any of that in the Elite https://store-581ad.mybigcommerce.co...can-model3.jpg I think if I got another, it would be a baffled Mishimoto. But not the expensive one. __________________ Fix your garage pics so we can see them

01-23-2015, 06:20 PM	#1
gatortuba Drives: 2017 Camaro V6 RS Join Date: Apr 2014 Location: Gainesville, Florida Posts: 64	Catch Can Will this work with my 2010 V6? http://www.pepboys.com/product/details/154992/00127

01-23-2015, 07:05 PM	#4
hzisfrom1994 ZYJ Drives: 2017 1SS Camaro/6 speed Join Date: Sep 2014 Location: Miami, FL Posts: 1,346	Just buy Elite's catch can, which is directly manufactured for the V6 Camaro. You get what you pay for, besides it is only 34$ more. I have it and it is fabulous!! Why not spend more money and buy something that you know for sure it will work for the car, isnt it? Buy something that it is reputable and directly manufacture for the car. Good luck anyway, it is your money and your car, you are the one who ultimately make the decision.

01-24-2015, 11:01 AM	#8
gutterball Drives: 2014 1LS M6 Supercharged Join Date: Feb 2011 Location: New Britain, Ct Posts: 937 View My Garage	I had one similar to that. it was just a hollow chamber, which is not what you want. get the Elite or MightyMouse