My first 2 mods! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mac5 · 04-04-2010, 10:22 PM

My 1st mod: I order custom fit Coco Mats from www.cocomats.com I have had them in several other cars and they never really show any signs of wear. They are extremely durable and very good quality. Set of 4 - $215.00 shipped.

My 2nd mod: I had the Ventureshield Ultra clearbra installed on the entire front cap, including the headlights, turn signals and fogs. This install included the entire rocker panel and door sill, the gill area up to the body line and mirrors. (see pics)

My opinion on the Ventureshield Ultra: It looks very glossy and natural as far as the finish goes, but does have a slight yellow hue to it, probably more noticeable on the Summit White. The installer did a good job of hiding the seams, you really have to look close to see them. There are a couple of stretch marks on one side of the from cap that I am going to let them look at. I feel the only way to fix stretch marks is to replace that piece. Overall I think they did a good job - this mod is very expensive - $860.00, but they do not have Summit White splash guards available and I know that those gill areas will take a beating if not protected.

Mark

Mach · 04-04-2010, 11:31 PM

Beautiful.... Cannot wait to get my SW RS

by the way my first two mods are:

1. LED Foglights
2. 4 Pack gauges

whamslam3 · 04-05-2010, 03:42 AM

looks nice u cant even tell its there. i always wondered what happens about washing your car after they put that on? and will it start to look nasty as it ages? or like certain weather conditions?

Docknock · 04-05-2010, 09:03 AM

looking good!!

Onereign · 04-05-2010, 09:13 AM

Looks nice, but I prefer the Lloyd's Custom Mats.

Kwik · 04-05-2010, 09:20 AM

Good looking car. I'm sure you are really proud of it. Is that Race Deck on the floor? Sweet looking garage. I have been considering that. What is your opinion? Can you use a floor jack on it? I do have to agree with Onereign, I LOVE my Lloyds mats. Regards, Bob

guiLT · 04-05-2010, 09:20 AM

Whats that other car under the cover?

Anyway. Nice mats! And VERY nice pictures!

ron10 · 04-05-2010, 09:47 AM

love it.

2SSARMY · 04-05-2010, 09:48 AM

My first two mods are:

A gatling gun that shoots hellfire missiles
Jet engine

The mats look awesome.... I'm totally going to look at their site.

mac5 · 04-05-2010, 10:53 AM

Quote:

Originally Posted by Kwik

Good looking car. I'm sure you are really proud of it. Is that Race Deck on the floor? Sweet looking garage. I have been considering that. What is your opinion? Can you use a floor jack on it? I do have to agree with Onereign, I LOVE my Lloyds mats. Regards, Bob

Thanks Kwik!

My garage floor is "GarageDeck" from www.bigfloors.com - they were great to deal and they offer free shipping. It was very easy to install. It will support approx. 41,000 lbs. so a jack stand should not be a problem.

I have the Lloyds logo mats in my Corvette and I love them - but the Corvette is not a daily driver - for me the Cocomats hold up better for daily use.

Mark

mac5 · 04-05-2010, 10:55 AM

Quote:

Originally Posted by guiLT

Whats that other car under the cover?

Anyway. Nice mats! And VERY nice pictures!

Thanks!

The car under the cover is my Artic White C6 Corvette.

Kwik · 04-05-2010, 11:52 AM

Thanks for the heads up on that website. They have some great pricing. The decking you have is a lot more reasonable than Race Deck. I had one style of rubber decking that would pull apart when you turned the wheels. Any problems with the stuff you have? Your garage looks awesome! Seems only right that a nice set of cars have a classy stable. Thanks again for the help. Regards, Bob

mac5 · 04-05-2010, 12:06 PM

Quote:

Originally Posted by Kwik

Thanks for the heads up on that website. They have some great pricing. The decking you have is a lot more reasonable than Race Deck. I had one style of rubber decking that would pull apart when you turned the wheels. Any problems with the stuff you have? Your garage looks awesome! Seems only right that a nice set of cars have a classy stable. Thanks again for the help. Regards, Bob

Bob,

I did a lot of research prior to deciding on that brand and I have been very happy with it. The locking manner of the tiles is very sturdy and I have not had any problems with it. They will even give you 10% off if you tell them you are a member of the Camaro5 Forum. You will need a saw blade made for cutting hard plastic.

Thanks!
Mark

Unfair · 04-05-2010, 12:10 PM

Nice car man, but $1,075 on floor mats and a bra?
could have gotten some go-fast mods for that

04-04-2010, 10:22 PM	#1
mac5 Drives: 2010 Camaro 2LT RS Join Date: Feb 2010 Location: Bartlett, Tennessee Posts: 113	My first 2 mods! My 1st mod: I order custom fit Coco Mats from www.cocomats.com I have had them in several other cars and they never really show any signs of wear. They are extremely durable and very good quality. Set of 4 - $215.00 shipped. My 2nd mod: I had the Ventureshield Ultra clearbra installed on the entire front cap, including the headlights, turn signals and fogs. This install included the entire rocker panel and door sill, the gill area up to the body line and mirrors. (see pics) My opinion on the Ventureshield Ultra: It looks very glossy and natural as far as the finish goes, but does have a slight yellow hue to it, probably more noticeable on the Summit White. The installer did a good job of hiding the seams, you really have to look close to see them. There are a couple of stretch marks on one side of the from cap that I am going to let them look at. I feel the only way to fix stretch marks is to replace that piece. Overall I think they did a good job - this mod is very expensive - $860.00, but they do not have Summit White splash guards available and I know that those gill areas will take a beating if not protected. Mark

04-04-2010, 11:31 PM	#2
Mach Drives: White M6 1LT RS Join Date: Mar 2010 Location: Canton, MI Posts: 1,676	Beautiful.... Cannot wait to get my SW RS by the way my first two mods are: 1. LED Foglights 2. 4 Pack gauges __________________ Pfadt Sway Bars - FE3 Suspension - Barton Shifter - IdealG's Clutch Master Cylinder - Trifecta - Vmax TB - Vararam Intake - MACE 25mm Insulator - Plenum Insulator - Ported/Gasket Matched Intake Manifold - Rx Catchcan - AAC DRL's - 4 Pack Aux Gauges - Steering Controls - AAC Afterburners - DIY Led Sidemarkers - ZL1 Front End Next mod: Done!

04-05-2010, 03:42 AM	#3
whamslam3 Camaro King [^^^] Drives: Apollo 11 Camaro IOM Join Date: Dec 2009 Location: CA Posts: 1,754	looks nice u cant even tell its there. i always wondered what happens about washing your car after they put that on? and will it start to look nasty as it ages? or like certain weather conditions? __________________

04-05-2010, 09:13 AM	#5
Onereign Detailing Addict Drives: 2SS/RS LS3 CGM Join Date: Nov 2009 Location: Bossier City, LA Posts: 135	Looks nice, but I prefer the Lloyd's Custom Mats. __________________ 2SS/RS, CGM, LS3, Polished Wheels, Sunroof

04-05-2010, 09:20 AM	#7
guiLT Tampa Gulf Coast Family Drives: 2001 Maxima Join Date: Oct 2009 Location: Tampa, Florida Posts: 6,585 View My Garage	Whats that other car under the cover? Anyway. Nice mats! And VERY nice pictures! __________________

04-05-2010, 09:03 AM	#4
Docknock Drives: 1SS/1LE Join Date: Nov 2009 Location: Millington, TN Posts: 240	looking good!!

04-05-2010, 09:20 AM	#6
Kwik Drives: car Join Date: Feb 2010 Location: USA Posts: 801	Good looking car. I'm sure you are really proud of it. Is that Race Deck on the floor? Sweet looking garage. I have been considering that. What is your opinion? Can you use a floor jack on it? I do have to agree with Onereign, I LOVE my Lloyds mats. Regards, Bob

04-05-2010, 09:47 AM	#8
ron10 Drives: 2010 2SS IOM L99 Join Date: Jan 2010 Location: LOUISVILLE,KY.. Posts: 7,545	love it.

04-05-2010, 09:48 AM	#9
2SSARMY Account Suspended Drives: 2SS/RS Join Date: Mar 2010 Location: Norman, OK Posts: 1,125	My first two mods are: A gatling gun that shoots hellfire missiles Jet engine The mats look awesome.... I'm totally going to look at their site.

04-05-2010, 11:52 AM	#12
Kwik Drives: car Join Date: Feb 2010 Location: USA Posts: 801	Thanks for the heads up on that website. They have some great pricing. The decking you have is a lot more reasonable than Race Deck. I had one style of rubber decking that would pull apart when you turned the wheels. Any problems with the stuff you have? Your garage looks awesome! Seems only right that a nice set of cars have a classy stable. Thanks again for the help. Regards, Bob

04-05-2010, 12:10 PM	#14
Unfair Banned Drives: 2001 Camaro SS Join Date: Jun 2009 Location: Chicago, IL Posts: 754	Nice car man, but $1,075 on floor mats and a bra? could have gotten some go-fast mods for that

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
$4k as additional down -- or mods? If so which mods?	Van	5th Gen Camaro SS LS LT General Discussions	45	09-06-2010 10:31 PM
Drifting in my 2010 Camaro + LC and 0-160 run after mods..!!	walhan_qtr	Camaro Photos \| Spyshots \| Video \| Media Gallery	1	05-06-2010 02:40 AM
Where to go to get mods installed?!	nickruta	USA - NY / NJ / PA	2	02-19-2010 07:22 PM
Mods for longevity	rtcage	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	5	09-27-2009 04:23 PM
Mods, Mods and More Mods	Tecca	Cosmetics and Lighting Modification Discussions	28	09-15-2009 02:20 PM