KB 3.6 mammoth install instructions - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TXsilvy · 08-26-2015, 05:05 AM

Anyone have them in pdf form? If so, please email me at txsilvy@yahoo.com. Thanks.

1KillerSS · 08-26-2015, 05:20 AM

Just a question outta sheer curiosity here, but, Doesn't KB have them?

TXsilvy · 08-26-2015, 09:30 AM

Not on their site. Not that i can find anyways

HOU_TX_SS · 08-26-2015, 02:08 PM

They want you to purchase the install instructions. I paid 50.00 for an install manual (paper format). Good luck getting ahold of them though! Mine was for the smaller blower which I have since sold.

cc-rider · 08-26-2015, 02:33 PM

Did you buy the charger brand new from KB, or used? I put on the base 2.8L kit and the instruction book came with it. Not sure if they include the instruction book with the bigger blowers when you buy from them? I would think so...but who knows.

TXsilvy · 08-26-2015, 03:15 PM

I bought the car with the blower already strapped in.

jinyufnen · 08-27-2015, 09:48 AM

Good luck getting ahold of them though! Mine was for the smaller blower which I have since sold.

TXsilvy · 08-27-2015, 07:51 PM

i called today and got ahold of a guy named mike. he answered my vague questions and asked me to e-mail him pictures along with my address so he can send the manual. we'll see how their follow up is.

he said that there should be a number stamped into the bottom of the pulley shaft to identify the blower. i cant find jack! i'm wanting to verify that it is a 3.6 and also see which intercooler is installed in it without pulling everything apart.

does camaro5 have a resident kenne bell guru that i can pester?

08-26-2015, 05:05 AM	#1
TXsilvy Drives: camaro Join Date: Aug 2015 Location: Houston Posts: 149	KB 3.6 mammoth install instructions Anyone have them in pdf form? If so, please email me at txsilvy@yahoo.com. Thanks.

08-26-2015, 05:20 AM	#2
1KillerSS Too much is never enough! Drives: AGP TT SS [COTW] 4/20/15 Join Date: Feb 2014 Location: Toledo,OH Posts: 4,149 View My Garage	Just a question outta sheer curiosity here, but, Doesn't KB have them? __________________ AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq *Build thread* http://www.camaro5.com/forums/showth...55#post8107855

08-26-2015, 09:30 AM	#3
TXsilvy Drives: camaro Join Date: Aug 2015 Location: Houston Posts: 149	Not on their site. Not that i can find anyways

08-26-2015, 02:08 PM	#4
HOU_TX_SS Drives: Camaro SS Join Date: Jan 2013 Location: Katy, Texas Posts: 156	They want you to purchase the install instructions. I paid 50.00 for an install manual (paper format). Good luck getting ahold of them though! Mine was for the smaller blower which I have since sold.

08-26-2015, 02:33 PM	#5
cc-rider Drives: 2010 Camaro SS Join Date: Dec 2006 Location: MN Posts: 1,179	Did you buy the charger brand new from KB, or used? I put on the base 2.8L kit and the instruction book came with it. Not sure if they include the instruction book with the bigger blowers when you buy from them? I would think so...but who knows.

08-26-2015, 03:15 PM	#6
TXsilvy Drives: camaro Join Date: Aug 2015 Location: Houston Posts: 149	I bought the car with the blower already strapped in.

08-27-2015, 09:48 AM	#7
jinyufnen Drives: camaro Join Date: Aug 2015 Location: CA Posts: 2	Good luck getting ahold of them though! Mine was for the smaller blower which I have since sold.

08-27-2015, 07:51 PM	#8
TXsilvy Drives: camaro Join Date: Aug 2015 Location: Houston Posts: 149	i called today and got ahold of a guy named mike. he answered my vague questions and asked me to e-mail him pictures along with my address so he can send the manual. we'll see how their follow up is. he said that there should be a number stamped into the bottom of the pulley shaft to identify the blower. i cant find jack! i'm wanting to verify that it is a 3.6 and also see which intercooler is installed in it without pulling everything apart. does camaro5 have a resident kenne bell guru that i can pester?